replacing injectors?????
#1
Member
Thread Starter
Join Date: Jun 2010
Location: tennessee
Posts: 536
Likes: 0
Received 0 Likes
on
0 Posts
replacing injectors?????
anyone done this is it a hard job? is there a do it yourself guide somewhere.i am sick of these loud injectors its freaking embarrassing.any help or advice.do you go back with oe or aftermarket?
twenty five views and not the first comment come on guys speak up
twenty five views and not the first comment come on guys speak up
Last edited by rrogers1221; 11-09-2010 at 12:18 AM.
#3
BAMF Club
What do you mean by loud injectors? When can you hear them?
#4
injectors are easy to replace... but they all have clicking.... what motor do you have
#5
Member
Thread Starter
Join Date: Jun 2010
Location: tennessee
Posts: 536
Likes: 0
Received 0 Likes
on
0 Posts
its the 5.4 they sound awful i stopped and had them listened to and the mechanic said they were just loud injectors making noise.then on top of that i have the cam phaser noise so my truck sounds like shat
#6
Noise, I can’t say I have ever heard my injectors. Maybe it’s just the growl coming from my backside that covers the noise. I would rank fuel injectors at a skill rating of 2 it’s as easy as changing a tire.
- Unbolt fuel rail.
- Unclip wire connection to each injector
- Pull injector straight out
- Push new injector into fuel rail ( I use small amount of grease to help slide on and not damage O-ring)
- Secure down fuel rail
- Reclip wires to each injector.
#7
BAMF Club
I'd focus on the cam phasers first, they're way more involved and expensive. Though you might be able to replace the injectors at the same time!
Trending Topics
#9
just turn the radio up