Replacing Emblems to 09-12
#1
Senior Member
Thread Starter
Replacing Emblems to 09-12
Anyone know how to do this the best and most convenient way?
I know there is a forum that shows step by step, but my search through the app isn't working so if you know where it is, a link would be greaaaaaat!
I know there is a forum that shows step by step, but my search through the app isn't working so if you know where it is, a link would be greaaaaaat!
#3
Senior Member
Thread Starter
Originally Posted by Patfan
Just use a hair dryer to warm up the decal, they peel right off. BEfore you put on the new decal use some windex to remove any grease or wax, then just make sure its straight.
#4
Storm Chaser /Navy Vet
#5
Storm Chaser /Navy Vet
#6
Senior Member
Thread Starter
Originally Posted by Storm Chasing Ford
And I am talking about the "F150" emblems.
#7
Junior Member
Join Date: Feb 2012
Location: Nacogdoches, TX
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
I never tried it, but if they are only stuck on there then this is what I heard from my Jeep forum. Take a piece of fishing line and on a hot day you can run the fishing line along the body and peel the emblems right off. Doesn't leave much residue or any damage.
Trending Topics
#8
I got my emblems off with a screw driver. I just pushed underneath the emblem and gently pryed up on it. I used a towel too so that I didn't scratch the paint. Then the sticky pad didn't leave much residue. And putting them on is the easy part. They have line up pins so they can't be put on crooked. They're pretty much dummy proof. But be sure for the rear emblem to get the flare side ones so that it will fit right. I just ordered mine from tasca parts for 98 bucks shipped and everything. That was for the fender badges and the tailgate badge.
#10
Senior Member
Thread Starter
Originally Posted by 04xlf150
I got my emblems off with a screw driver. I just pushed underneath the emblem and gently pryed up on it. I used a towel too so that I didn't scratch the paint. Then the sticky pad didn't leave much residue. And putting them on is the easy part. They have line up pins so they can't be put on crooked. They're pretty much dummy proof. But be sure for the rear emblem to get the flare side ones so that it will fit right. I just ordered mine from tasca parts for 98 bucks shipped and everything. That was for the fender badges and the tailgate badge.