Replace Lariat woodgrain dash/door inserts with FX4?
#1
Replace Lariat woodgrain dash/door inserts with FX4?
Is it possible to replace 2007 Lariat woodgrain dash/door inserts with ones from an FX4? I like the carbon fiber look better than the woodgrain... My friend was going to trade me until we noticed the cutout is different around the a/c and heat controls since the Lariat had auto climate control and the FX4 had dials/*****. I have heard of the stickers you can put on top but not entirely fond of the idea... Any ideas? Thanks!
#3
Moderator (Ret.)
Unfortunatly for you, the Lariat and King Ranch models used the EATC (electronic auto temp control), and therefor the plastic that surrounds it will be different from the rest of the 2004 to 2008 models. As Atom points out, it's as easy as unsnapping for most of the pieces, and swapping out.
You might want to check Ebay; I've seen kits available to change the dash and door panel inserts; can't recall if they were carbon fiber or not.
You might want to check Ebay; I've seen kits available to change the dash and door panel inserts; can't recall if they were carbon fiber or not.
#4
replace lariat wood grain inserts with FX4 carbon fiber
Wasn't sure if FX4 had electronic auto temp control, but this picture seems to confirm:
http://www.fordf150.net/photos/showp...0/ppuser/72059
Has anyone here tried to replace the lariat woodgrain with the ones from an FX4? Thanks!
http://www.fordf150.net/photos/showp...0/ppuser/72059
Has anyone here tried to replace the lariat woodgrain with the ones from an FX4? Thanks!
Unfortunatly for you, the Lariat and King Ranch models used the EATC (electronic auto temp control), and therefor the plastic that surrounds it will be different from the rest of the 2004 to 2008 models. As Atom points out, it's as easy as unsnapping for most of the pieces, and swapping out.
You might want to check Ebay; I've seen kits available to change the dash and door panel inserts; can't recall if they were carbon fiber or not.
You might want to check Ebay; I've seen kits available to change the dash and door panel inserts; can't recall if they were carbon fiber or not.