FX4 Silver Screw

Here's the F150 set in white...

http://www.gorecon.com/product.php?pk=334

squirrelyyy

yea little confusing thought the same thing too the first time I looked at them, but you just have to read the descriptions. they do show pics of them they come in three illuminations white,amber and red in chrome or black chrome. I ordered the chrome with white illumination

squirrelyyy

Got badges today now I just need a warmer day the 20 to get them on I'm souped I'll post up pics as soon as I get them on

J.Wal

iTrader: (1)

Can't wait to see them. Let us know how the install goes

bobkyle2

i dont know if ive ever used the word neat....but these are very neat..errr..just one more thing on that list i want to get

squirrelyyy

going to my brother in laws shop tomorrow hopefully will be on tomorrow fingers crossed

squirrelyyy

OK they are on and working PHEW install went rather easy but did have a couple little burps. First one pi$$ed me off took off driver side badge pretty simple. fishing line cut threw adhesive no prob, peeled off adhesive and the paint was all bubbled up under it and peeled off down to the primer (didn't use a heat gun or any chemicals at this point) just a bad paint job I guess. Behind badge 2 pin alignment holes and one 1/2-3/4 inch hole between them perfect to get wire
through.drivers side done went to passenger side badge came off perfect no paint peel beautiful BUT then my nightmare the big hole didn't line up right (not centered with badge),this wouldn't let wire into fender which in turn wouldn't let badge sit up against fender,so this is were my nightmare started had to drill 1/2" hole through fender went well but cringed the whole time,but it's done and it wasn't that painful. Here are some pics happy with them but not lit there is a pink hue to the lenses not to keen on that though,but lit up they look awesome here are some pics.
Unlit
Attachment 11308
Lit up
Attachment 11309
Night Shot
Attachment 11311

J.Wal

iTrader: (1)

so what did you wire them into? you put them on there own switch or wired into parking/ head lights? where did you feed the wire to once inside the fender?

squirrelyyy

Wired them into the parking lights. Just tie wrapped underneath the lip of the fender (inside hood compartment) only 2 little wires it does have some type of resistor in line had 2 way tape on it and just stuck it out of the way. It took probably around an hour my brother in law and I were BS'ing alot if we just worked it would have been done pretty quick

J.Wal

iTrader: (1)

Looks great. Could you take a pic of the side of the truck at night with them lit up, I want to get an idea of how bright/ noticeable they are from the side, like from tail light to grill type. That would be great. I think these are going on the wish list. Haha