mattman122

This may be a stupid question but ive looked everywere and havent found an answer. Ive watched videos and seen pictures of people taking the hose off the brake booster and the hose being like 6-8 inches long. My hose is about an inch and a half? I have two hoses coming into a T that then connects via a 1.5inch long hose to the brake booster. Is there a specific hose that i can take off the T? Or do i need to go buy a long enough hose to replace the one going to the brake booster so i can suck the sea foam in? Sorry if this is confusing but i didnt want to accidently mess somin up.

otto457

Why do you think you need the Seafoam in the first place? It does very little for cleaning, and manually cleaning the TB and MAF is a much better option.

https://www.f150forum.com/f6/seafoam...-79106/index2/

ford lover 07

I have a 07 with 58k on it and i did mine works great you take the bottom hose off it should be about 3 to 4 in long and you will have to get a a cup to pour the seafoam into cuz the hose is to big for the bottle and then u have somebody in the truck holding the rpms at about 2000 or it will die when you put the hose in the cup and once it is all sucked out (witch is about a second) then shut the truck off wait 10 min and start it up and it will shoot out a bunch of White smoke then drive it on the hwy for a bit and you should punch it a few times I would do it if I were you you can see it working that's what I like about it