The Famous Gotts Mod 4.6L
10-09-2010, 12:21 PM
#1
Senior Member
Thread Starter
The Famous Gotts Mod 4.6L
I have read a lot about the Gotts Mod and it looks like it has kind of evolved over time being done with different products. From sanding the PVC to rubber connectors to flex hose to taking out the silencers/baffles. Could some of you that have done the 4.6L mod recently, emphasize recent, list the part numbers and where you purchased them and maybe some pictures of the finished product? I saw one on another site that had a flex hose, no clamps or adapters, and it looked very clean but it was not clear what type of hose it was or where they got it.
2005 F150 4X4 STX SCAB 4.6L Stock - Edge Evolution
2005 F150 4X4 STX SCAB 4.6L Stock - Edge Evolution
Last edited by stmar; 10-09-2010 at 12:27 PM.
10-09-2010, 04:29 PM
#2
Senior Member
Thread Starter
Found that flex duct that was used:
Looks like it costs a bit, prices from $20 - $30. The 2005 4.6L looks like it does not need that much to get from the air filter to the fender opening so this would probably be a little overkill. I am going to look for some type of flexible duct or maybe a rigid duct to go the few inches.
Looks like it costs a bit, prices from $20 - $30. The 2005 4.6L looks like it does not need that much to get from the air filter to the fender opening so this would probably be a little overkill. I am going to look for some type of flexible duct or maybe a rigid duct to go the few inches.