txg

Been a member for a while and now I have a question, as far as I can get from searching the block on the rear of an FX4 are 1.5''. Am I correct? Was wandering cause I want to lift my 2wd to roughly the height of a leveled Fx4. I think I got the front figured out by going with Pro Comp ProRunner or Rancho Quick Lifts. Any help is great and Thanks

homer

I have a 2005 FX4 and I can confirm the stock was a 1.5" block. I replaced mine to 3" blocks due to my leveling kit being too high. With your 2WD, you should have no blocks is my understanding. So yes, the FX4 does come with 1.5" if that's what you're after. Remember, you'll also likely need U-Bolts that are longer as well.

RajunKajun59

He did it, https://www.f150forum.com/f78/gators...thread-225101/

Never mind noticed you were in his thread after the post.

eej711

Don't the 04-08s have a 2" block and 09+ have 1.5"?

homer

my 2005 was a 1.5", I'm not sure what the 09's+ have.

Z7What

04-08 have a block just shy of 2", more like 1-7/8".

The 09+ have 1.25" blocks.

Wayne

homer

I still have my stock ones sitting in the box outside too... I'll measure them up after for you.

homer

Actually... I was wrong, Z7What hit it. I don't know if it's because I have an FX4 or not but mine our 2" almost spot on. Somewhere I had read they were 1.5" and I thought they were but I never actually measured mine when I swapped them with the 3" blocks. See the attached picture.

06_LVLD_SCREW

So on my 06 I should be able to clear 35s with the leveling kit and block?

techrep

iTrader: (1)

dont need a block in the rear for 35’s