Prodigy Brake Controller
04-13-2007, 02:30 PM
#1
Junior Member
Thread Starter
Join Date: Feb 2007
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Prodigy Brake Controller
Hey -
I just purchased the Prodigy Brake Controller unit and it came with what is supposed to be the correct harness to work with my '07 F150 4X4. Now here is my easy question - Can anyone describe for me where (under the dash) the harness that leads from the controller plugs into my truck? Any thoughts will be very much appreciated!
Thanks,
David
I just purchased the Prodigy Brake Controller unit and it came with what is supposed to be the correct harness to work with my '07 F150 4X4. Now here is my easy question - Can anyone describe for me where (under the dash) the harness that leads from the controller plugs into my truck? Any thoughts will be very much appreciated!
Thanks,
David
08-04-2017, 01:31 PM
#2
It'll either be right above your right knee as you're sitting at the wheel, just to the right and above the OBDII port or a little further to the right clipped to the back of the coin cubby in the dash as shown in the video I've linked below:
https://www.etrailer.com/tv-install-...0-hm47297.aspx
The vid shows a different controller being installed, but the procedure would be the same. If your truck already has the 7-way at the rear bumper, the controller should be operational once you plug it in, although occasionally you'll need to add a relay available from your Ford Dealer.
The connector you're looking for is gray in color.
https://www.etrailer.com/tv-install-...0-hm47297.aspx
The vid shows a different controller being installed, but the procedure would be the same. If your truck already has the 7-way at the rear bumper, the controller should be operational once you plug it in, although occasionally you'll need to add a relay available from your Ford Dealer.
The connector you're looking for is gray in color.