power windows
07-28-2016, 08:20 AM
#1
Junior Member
Thread Starter
Join Date: Dec 2015
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
power windows
i have windows that are very willing to go down, but they are very reluctant to go back up. i have read several threads about similar issues. but mine seems just a bit different. it began in only the driver door so i expected the main switch. now it is happening at the switches on all the doors.
if the big switch on the driver door goes bad, can it cause all the doors to have the same issue? i don't have a wiring diagram. or should i be looking for something like a faulty plug where everything is wired together?
thx. . .
D~~~!
if the big switch on the driver door goes bad, can it cause all the doors to have the same issue? i don't have a wiring diagram. or should i be looking for something like a faulty plug where everything is wired together?
thx. . .
D~~~!
07-28-2016, 08:22 AM
#2
Yes. Power is routed to the driver door switch, then to all the others. Take the switch box out, flip it over, grab each individual wire firmly and shove it back into its spot inside the plug. The wires like to loosen up from the pins after a while.
If that doesn't work, pull back the rubber boot leading from your door to the truck and look for any signs of fraying or rubbing in the wires.
If that doesn't work, pull back the rubber boot leading from your door to the truck and look for any signs of fraying or rubbing in the wires.