Power door lock wiring diagram
#1
Junior Member
Thread Starter
Join Date: Sep 2012
Location: Alvin, TX
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Power door lock wiring diagram
The door looks in my brothers 06 supercrew doesn't work with either switch or the key fob. I checked fuse and its good and i tried using the drives switch out of my truck in his truck and it still didn't work. Does anyone have a wiring diagram so i know what wires to check with the DVOM?
#4
Senior Member
I installed a pop-n-lock on the tailgate. I tapped into he passenger door lock wires......instructions said, Lock-pink/black, Unlock-pink/orange or red/orange. 07 lariat
#5
New guy looking for help. First electrical mod.
Did the lock work off the doors only or did the fob and key pad work too?
My first mod, second post on the forum. Trying not to over complicate the project but I have more questions than answers.
07 lariat screw.
Thanks in advance,
My first mod, second post on the forum. Trying not to over complicate the project but I have more questions than answers.
07 lariat screw.
Thanks in advance,
Last edited by BDP; 08-31-2013 at 08:02 PM.
The following users liked this post:
BDP (08-31-2013)
Trending Topics
#8
Senior Member
It sounds like a ground prob. I would first check the ground at the switches you can do this ez by just getting the truck in the drak and turning on the lights and see if the lights in the switches turn on.
#9
Junior Member
Thread Starter
Join Date: Sep 2012
Location: Alvin, TX
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
no the lights in the switches dont work and at some point the dome lights quit coming on with any door open and the radio quit turning off when the drivers door is opened. Which leads me to think the VSM/BSM might be bad.