Plasti dip Raptor Decal
#1
Member
Thread Starter
Plasti dip Raptor Decal
Has anyone ever tried to plasti-dip the Rapter Decal emblem on there truck??
I was sitting in school and I was thinking about how to "stensil" that in using masking tape basically. The only reason I was using Plasti dip is then I can remove it if it looks like crap and its cheap
I was sitting in school and I was thinking about how to "stensil" that in using masking tape basically. The only reason I was using Plasti dip is then I can remove it if it looks like crap and its cheap
Last edited by Jdogger4; 01-29-2014 at 10:04 AM.
#3
Member
Thread Starter
That`s what I was thinking but I think I seen somebody saying that they were going to try and they either never did or deleted the forum!! Really was intrested in how that worked for them
#5
It would be very difficult to do. Because the plastidip has to be wet when you remove the stencil or tape. I did my hood and sprayed a bunch of coats in the middle staying a couple of inches away from the tape then I put one super heavy coat up against the tape and I had to pull the tape of before the plastidip dried. So using a stencil would be very difficult.
#6
Senior Member
http://www.ebay.com/itm/Ford-F150-Raptor-SVT-graphic-decal-sticker-kit-BLACK-VINYL-/171223257249?pt=Motors_Car_Truck_Parts_Accessories&hash=item27ddb390a1&vxp=mtr
The following users liked this post:
sunseteastgraphixcom (03-19-2014)
Trending Topics
#10
Senior Member
The following users liked this post:
sunseteastgraphixcom (03-19-2014)