When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Sitting on a 2.5" HBS Level kit and 295/60/20 (34.45") Nitto Trail Graps. Rims are 20x9 Tuff T01 with +10mm offset. I trimmed my front valance and I don't rub unless turning full left or right and its minor.
Our trucks look mean with 35s under a level kit. I like the look more than most lifted trucks!
Dude, how much trimming did you have to do? I'm looking at getting Billies all around and putting them on the highest setting, and am looking at either 20x9s or 18x9s with 35s.
Ye of little faith...just trimmed inside wheel liner and lower front valance like all you 4wd guys. Check out my garage...lots of pics. 2007 2wd 5spd 3" level.
Dude, how much trimming did you have to do? I'm looking at getting Billies all around and putting them on the highest setting, and am looking at either 20x9s or 18x9s with 35s.
I've got a 2.5" HBS level. Billsteins only go to 2" correct? Mine barely squeeked in in the front, I trimmed the front valence and the rear wheel well. Nothing difficult, 5 min with a sawzall and you're golden. I'd go with 20x9s, no one regrets getting bigger rims.
I've got a 2.5" HBS level. Billsteins only go to 2" correct? Mine barely squeeked in in the front, I trimmed the front valence and the rear wheel well. Nothing difficult, 5 min with a sawzall and you're golden. I'd go with 20x9s, no one regrets getting bigger rims.
See, I thought that too and a guy told me he got 3" out of his, and the TAP Auto guy said he got 2 and 3/16". So I'm not sure.
I got a hair over 2'' with my bilsteins but you might as well call it 2''
The guy that got close to 3" said he's got the tow package and that may account for the extra inch in the front. I hope to just get 2". I re-thought my set up and would go with a 33x12.50 over 35s. If I get 2.5-3" I'll go with 35s and re-gear.
03-20-2014, 09:33 PM
