Pics of Lowered 04-08?
#1
Member
Thread Starter
Pics of Lowered 04-08?
Heya guys! I know Im not alone with having a lowered Scab. Post up your pics. Share your specs if you know, and what you have done. Heres mine to start. Just got the truck and still trying to figure out what was done... lol. Plan for Bags all the way around and laying frame.
The following users liked this post:
Bigdaddyvess (03-11-2014)
#3
Senior Member
Heya guys! I know Im not alone with having a lowered Scab. Post up your pics. Share your specs if you know, and what you have done. Heres mine to start. Just got the truck and still trying to figure out what was done... lol. Plan for Bags all the way around and laying frame.
#4
Member
Thread Starter
As soon as it gets Light enough outside Ill shoot a side pic.
Front = 30.5 in.
Rear = 31.75
Tire size = 275/45/20
American Racing 20" (unknown type)
Haven't gotten to evaluate all that has been done to the suspension, but there are upper bag mounts on the frame above the leafs
so I am assuming that at one time it had Air Lift or helpers bags on it.
I plan on putting MMW upper and lower front CA on with D2600 Airlift bags and a 4-link bag set up in the rear with Accuair Elevel in the future. But for now she's gonna ride as is.
I'm in mid build on a 1972 C10 Bagged Frame layin truck. Custom built frame, 4-link, porterbuilt dropmember, MMW CA...
Should be nice once I finish it.
Front = 30.5 in.
Rear = 31.75
Tire size = 275/45/20
American Racing 20" (unknown type)
Haven't gotten to evaluate all that has been done to the suspension, but there are upper bag mounts on the frame above the leafs
so I am assuming that at one time it had Air Lift or helpers bags on it.
I plan on putting MMW upper and lower front CA on with D2600 Airlift bags and a 4-link bag set up in the rear with Accuair Elevel in the future. But for now she's gonna ride as is.
I'm in mid build on a 1972 C10 Bagged Frame layin truck. Custom built frame, 4-link, porterbuilt dropmember, MMW CA...
Should be nice once I finish it.
Last edited by Bigdaddyvess; 03-11-2014 at 07:29 AM.
#7
Senior Member
07 FX2 3/5 djm kit, AirLift SlamAir helper, belltech rear swaybar
(100psi and 5-600lbs of lumber in the bed on the picture)
In the process of laying the frame on 32" tall tire.
MMW are great but with the stock mount you will only lay with tiny tire (28"tall)
I have a complete MMW front end package and having issue with it (in discussion with MMW on that)
Trending Topics
#9
Senior Member
Mine isn't a Scab, but it is bagged. Not trying to hijack your post, lol. During the quest of bagging my truck I found out there isn't a lot of people that have done anything really radical to these year model trucks. I'm running a full Accuair big air management kit, rideTech shockwaves up front with DJM lowering control arms, rideTech parallel 4 link with behind the axle sleeve bags (kit).
#10
Senior Member
As soon as it gets Light enough outside Ill shoot a side pic.
Front = 30.5 in.
Rear = 31.75
Tire size = 275/45/20
American Racing 20" (unknown type)
Haven't gotten to evaluate all that has been done to the suspension, but there are upper bag mounts on the frame above the leafs
so I am assuming that at one time it had Air Lift or helpers bags on it.
I plan on putting MMW upper and lower front CA on with D2600 Airlift bags and a 4-link bag set up in the rear with Accuair Elevel in the future. But for now she's gonna ride as is.
I'm in mid build on a 1972 C10 Bagged Frame layin truck. Custom built frame, 4-link, porterbuilt dropmember, MMW CA...
Should be nice once I finish it.
Front = 30.5 in.
Rear = 31.75
Tire size = 275/45/20
American Racing 20" (unknown type)
Haven't gotten to evaluate all that has been done to the suspension, but there are upper bag mounts on the frame above the leafs
so I am assuming that at one time it had Air Lift or helpers bags on it.
I plan on putting MMW upper and lower front CA on with D2600 Airlift bags and a 4-link bag set up in the rear with Accuair Elevel in the future. But for now she's gonna ride as is.
I'm in mid build on a 1972 C10 Bagged Frame layin truck. Custom built frame, 4-link, porterbuilt dropmember, MMW CA...
Should be nice once I finish it.
wish I would have gone with MMW at least in the back, I do like my shockwaves up front.