Martian

You're trying to see if the motor works... you jump the window motor directly from the battery. If it works, great. Then you know it's a wiring or switch problem. If it doesn't, then you know it's the motor.

Surfer285

I mentioned in the beginning of the post that I tried a brand new motor and nothing happened

Project_Red

No man. There not talking about a new motor there telling u to do something to see if your wires are ****ed up somewhere befor they get to the door so do a jump straight to the motor from the switch and that will tell u if u need to do some wiring...

Martian

Exactly. Just jump the damn motor!!!

techrep

iTrader: (1)

The passenger door switch draws power from the master panel on the drivers door...if you have a broken wire between the master panel and the rear door and install a new motor it will not work...run a jumper wire from power straight to the rear door motor to verify the motor works...this will tell you have an open wire in between the master and the rear door... you know all the switches are good, but I doubt you tried a new master panel...these are a known problem...I did see you cleaned contacts.