Official Ford Maintenance Schedule
12-03-2011, 10:29 PM
#1
Certified Ford Technician
Thread Starter
Official Ford Maintenance Schedule
8,000 Km (5,000 Miles)
- Change engine oil and install a new oil filter.
- Rotate tires and inspect for wear.
- Carry-out multi-point inspection (recommended).
- Change engine oil and install a new oil filter.
- Inspect tires for wear. Rotation recommended for optimal tire life.
- Carry-out multi-point inspection (recommended).
- Change engine oil and install a new oil filter.
- Inspect automatic transmission fluid level (if equipped with an underhood fluid level indicator).
- Inspect brake pads, shoes, rotors, drums, brake lines, hoses and parking brake system (adjust parking brake if required).
- Inspect wheel ends for end play and noise.
- Inspect engine cooling system and hoses.
- Inspect steering linkage, ball joints, suspension and if equipped, halfshafts, driveshaft and U-joints.
- Lubricate steering linkage, suspension and ball joints (if equipped with zerk fittings).
- Lubricate halfshafts, driveshaft and U-joints.
- Rotate tires and inspect for wear.
- Install a new cabin air filter (if equipped).
- Inspect and lubricate 4WD front axle shaft U-joints (F-250/350/450/550).
- Carry-out multi-point inspection (recommended).
- Change engine oil and install a new oil filter.
- Inspect tires for wear. Rotation recommended for optimal tire life.
- Carry-out multi-point inspection (recommended).
- Change engine oil and install a new oil filter.
- Inspect tires for wear. Rotation recommended for optimal tire life.
- Carry-out multi-point inspection (recommended).
- Change engine oil and install a new oil filter.
- Rotate tires and inspect for wear.
- Inspect brake pads, shoes, rotors, drums, brake lines, hoses and parking brake system (adjust parking brake if required).
- Inspect wheel ends for end play and noise.
- Inspect engine cooling system and hoses.
- Inspect exhaust system and heat shields.
- Inspect steering linkage, suspension and ball joints and, if equipped, halfshafts, driveshaft and U-joints.
- Install a new engine air filter (not required for Focus).
- Install a new fuel filter (not required for Fusion and Milan).
- Install a new cabin air filter (if equipped).
- Change automatic transmission/transaxle fluid on all vehicles equipped with the TorqShift transmission and externally mounted remote filter. Install a new remote filter if equipped with a TorqShift transmission. Inspect automatic transmission fluid level using the fluid level on all other vehicles (if equipped with an underhood fluid level indicator). Change the in-line service-installed transmission fluid filter (if equipped).
- Install new climate controlled seat cushion filters (if equipped) (Navigator, Freestar, Monterey and Expedition).
- Lubricate steering linkage, suspension and ball joints (if equipped with zerk fittings).
- Lubricate the 4WD front axle shaft U-joints (if equipped) (F-250/350/450/550).
- Carry-out multi-point inspection (recommended).
- Change engine oil and install a new oil filter.
- Inspect tires for wear. Rotation recommended for optimal tire life.
- Carry-out multi-point inspection (recommended).
- Change engine oil and install a new oil filter.
- Inspect tires for wear. Rotation recommended for optimal tire life.
- Carry-out multi-point inspection (recommended).
- Change engine oil and install a new oil filter.
- Rotate tires and inspect for wear.
- Inspect automatic transmission fluid level (if equipped with an underhood fluid level indicator).
- Inspect brake pads, shoes, rotors, drums, brake lines, hoses and parking brake system (adjust parking brake if required).
- Inspect wheel ends for end play and noise.
- Inspect engine cooling system and hoses.
- Inspect steering linkage, suspension and ball joints.
- Inspect halfshafts, driveshaft and U-joints (if equipped).
- Install a new cabin air filter (if equipped).
- Lubricate steering linkage, suspension and ball joints (if equipped with zerk fittings).
- Lubricate the 4WD front axle shaft U-joints (if equipped) (F-250/350/450/550).
- Carry-out multi-point inspection (recommended).
- Change engine oil and install a new oil filter.
- Inspect tires for wear. Rotation recommended for optimal tire life.
- Change rear axle fluid (Class A Motorhome).
- Carry-out multi-point inspection (recommended).
- Change engine oil and install a new oil filter.
- Inspect tires for wear. Rotation recommended for optimal tire life.
- Carry-out multi-point inspection (recommended).
- Change engine oil and install a new oil filter.
- Rotate tires and inspect for wear.
- Inspect brake pads, shoes, rotors, drums, brake lines, hoses and parking brake system (adjust parking brake if required).
- Inspect wheel ends for end play and noise.
- Inspect engine cooling system and hoses.
- Inspect exhaust system and heat shields.
- Inspect steering linkage, suspension and ball joints.
- Inspect halfshafts, driveshaft and U-joints (if equipped).
- Install a new engine air filter (not required for Focus).
- Install a new fuel filter (not required for Fusion and Milan).
- Install a new cabin air filter (if equipped).
- Change automatic transmission/transaxle fluid on all vehicles equipped with the TorqShift or 4F27E transmissions. Install a new externally mounted remote filter element for all TorqShift transmissions (if equipped). Install a new internal TorqShift transmission fluid filter located inside the transmission bottom pan (vehicles without externally mounted remote filter only). Inspect automatic transmission fluid level on all other vehicles (if equipped with an underhood fluid level indicator). Change the in-line service-installed transmission fluid filter (if equipped).
- Change automatic transmission fluid on all vehicles equipped with a CVT transmission and install a new high-pressure case filter and O-rings.
- Install new climate controlled seat cushion filters (if equipped) (Navigator, Freestar, Monterey and Expedition).
- Lubricate steering linkage, suspension and ball joints (if equipped with zerk fittings).
- Lubricate rear wheel drive (RWD) front wheel bearings, install new grease seals and adjust bearings (if equipped with serviceable bearings).
- Lubricate the four wheel drive (4WD) front axle shaft U-joints (if equipped) (F-250/350/450/550).
- Carry-out multi-point inspection (recommended).
- Change engine oil and install a new oil filter.
- Inspect tires for wear. Rotation recommended for optimal tire life.
- Carry-out multi-point inspection (recommended).
- Change engine oil and install a new oil filter.
- Inspect tires for wear. Rotation recommended for optimal tire life.
- Carry-out multi-point inspection (recommended).
- Change engine oil and install a new oil filter.
- Rotate tires and inspect for wear.
- Inspect automatic transmission fluid level (if equipped with an underhood fluid level indicator).
- Inspect brake pads, shoes, rotors, drums, brake lines, hoses and parking brake system (adjust parking brake if required).
- Inspect wheel ends for end play and noise.
- Inspect engine cooling system and hoses.
- Inspect steering linkage, suspension and ball joints.
- Inspect halfshafts, driveshaft and U-joints (if equipped).
- Install a new cabin air filter (if equipped).
- Check air filter restriction gauge, install a new filter as necessary (Focus only).
- Lubricate steering linkage, suspension and ball joints (if equipped zerk fittings).
- Lubricate the 4WD front axle shaft U-joints (if equipped) (F-250/350/450/550).
- Carry-out multi-point inspection (recommended).
- Change engine oil and install a new oil filter.
- Inspect tires for wear. Rotation recommended for optimal tire life.
- Carry-out multi-point inspection (recommended).
- Change engine oil and install a new oil filter.
- Inspect tires for wear. Rotation recommended for optimal tire life.
- Carry-out multi-point inspection (recommended).
12-03-2011, 10:30 PM
#2
Certified Ford Technician
Thread Starter
144,000 Km (90,000 Miles)
- Change engine oil and install a new oil filter.
- Rotate tires and inspect for wear.
- Inspect brake pads, shoes, rotors, drums, brake lines, hoses and parking brake system.
- Inspect wheel ends for end play and noise.
- Inspect engine cooling system and hoses.
- Inspect exhaust system and heat shields.
- Inspect steering linkage, suspension and ball joints.
- Inspect halfshafts, driveshaft and U-joints (if equipped).
- Install a new engine air filter (not required for Focus).
- Install a new fuel filter (not required for Fusion and Milan).
- Install a new cabin air filter (if equipped).
- Change automatic transmission/transaxle fluid on all vehicles equipped with TorqShift transmissions and externally mounted remote filter. Install a new remote filter element on vehicles equipped with the TorqShift transmission. Inspect automatic transmission fluid level on all other vehicles (if equipped with an underhood fluid level indicator). If equipped, change the in-line service-installed transmission fluid filter.
- Install new climate controlled seat cushion filters (if equipped) (Navigator, Freestar, Monterey and Expedition).
- Lubricate steering linkage, suspension and ball joints (if equipped with zerk fittings).
- Lubricate the 4WD front axle shaft U-joints (if equipped) (F-250/350/450/550).
- Carry-out multi-point inspection (recommended).
- Change engine oil and install a new oil filter.
- Inspect tires for wear. Rotation recommended for optimal tire life.
- Carry-out multi-point inspection (recommended).
- Change engine oil and install a new oil filter.
- Rotate tires and inspect for wear.
- Inspect accessory drive belt(s).
- Install new spark plugs.
- Change rear axle fluid (F-450/550, E-450 and Class A Motorhome).
- Change Premium Gold coolant or change at 6 years, whichever comes first.
- Install a new external PCV on all cars and light trucks under 6,000 lb Gross Vehicle Weight (GVW) (except 3V engines).
- Change manual transmission fluid (if equipped) (except Escape).
- Carry-out multi-point inspection (recommended).
- Change engine oil and install a new oil filter.
- Rotate tires and inspect for wear.
- Inspect automatic transmission fluid level (if equipped with an underhood fluid level indicator).
- Inspect brake pads, shoes, rotors, drums, brake lines, hoses and parking brake system (adjust parking brake if required).
- Inspect wheel ends for end play and noise.
- Inspect engine coolant system and hoses.
- Inspect steering linkage, suspension and ball joints.
- Inspect halfshafts, driveshaft and U-joints (if equipped).
- Install a new cabin air filter (if equipped).
- Lubricate steering linkage, suspension and ball joints (if equipped with zerk fittings).
- Lubricate the 4WD front axle shaft U-joints (if equipped) (F-250/350/450/550).
- Carry-out multi-point inspection (recommended).
- Change engine oil and install a new oil filter.
- Inspect tires for wear. Rotation recommended for optimal tire life.
- Carry-out multi-point inspection (recommended).
- Change engine oil and install a new oil filter.
- Inspect tires for wear. Rotation recommended for optimal tire life.
- Carry-out multi-point inspection (recommended).
- Change engine oil and install a new oil filter.
- Rotate tires and inspect for wear.
- Inspect brake pads, shoes, rotors, drums, brake lines, hoses and parking brake system.
- Inspect wheel ends for end play and noise.
- Inspect engine cooling system and hoses.
- Inspect exhaust system and heat shields.
- Inspect steering linkage, suspension and ball joints.
- Inspect halfshafts, driveshaft and U-joints (if equipped).
- Install a new engine air filter (not required for Focus).
- Install a new fuel filter (not required for Fusion and Milan).
- Install a new cabin air filter (if equipped).
- Install a new external PCV valve on all cars and light trucks over 6,000 lb GVW (except 3V engines).
- Change automatic transmission/transaxle fluid on all vehicles equipped with the TorqShift or 4F27E transmissions. Install a new externally mounted remote filter element for all TorqShift transmissions (if equipped). Install a new internal TorqShift transmission fluid filter located inside the transmission bottom pan (vehicles without externally mounted remote filter only). Inspect automatic transmission fluid level on all other vehicles (if equipped with an underhood fluid level indicator). If equipped, change the in-line service-installed transmission fluid filter.
- Change automatic transmission fluid on all vehicles equipped with a CVT transmission and install a new high-pressure case filter and O-rings.
- Install new climate controlled seat cushion filters (if equipped) (Navigator, Freestar, Monterey and Expedition).
- Lubricate RWD front wheel bearings, install new grease seals and adjust bearings (if equipped with serviceable bearings).
- Lubricate steering linkage, suspension and ball joints (if equipped with zerk fittings).
- Lubricate the 4WD front axle shaft U-joints (if equipped) (F-250/350/450/550).
- Carry-out multi-point inspection (recommended).
- Change engine oil and install a new oil filter.
- Inspect tires for wear. Rotation recommended for optimal tire life.
- Carry-out multi-point inspection (recommended).
- Change engine oil and install a new oil filter.
- Inspect tires for wear. Rotation recommended for optimal tire life.
- Carry-out multi-point inspection (recommended).
- Change engine oil and install a new oil filter.
- Rotate tires and inspect for wear.
- Inspect automatic transmission fluid level (if equipped with an underhood fluid level indicator).
- Inspect brake pads, shoes, rotors, drums, brake lines, hoses and parking brake system (adjust parking brake if required).
- Inspect wheel ends for end play and noise.
- Inspect engine cooling system and hoses.
- Inspect steering linkage, suspension and ball joints.
- Inspect halfshafts, driveshaft and U-joints (if equipped).
- Install a new cabin air filter (if equipped).
- Lubricate steering linkage, suspension and ball joints (if equipped with zerk fittings).
- Lubricate the 4WD front axle shaft U-joints (if equipped) (F-250/350/450/550).
- Carry-out multi-point inspection (recommended).
- Change engine oil and install a new oil filter.
- Inspect tires for wear. Rotation recommended for optimal tire life.
- Carry-out multi-point inspection (recommended).
- Change engine oil and install a new oil filter.
- Inspect tires for wear. Rotation recommended for optimal tire life.
- Carry-out multi-point inspection (recommended).
- Change engine oil and install a new oil filter.
- Rotate tires and inspect for wear.
- Inspect brake pads, shoes, rotors, drums, brake lines, hoses and parking brake system.
- Inspect wheel ends for end play and noise.
- Inspect engine cooling system and hoses.
- Change Motorcraft Premium Gold coolant (see Exceptions To Normal Schedule and Mileage Base).
- Inspect exhaust system and heat shields.
- Inspect steering linkage, suspension and ball joints.
- Inspect halfshafts, driveshaft and U-joints (if equipped).
- Install a new fuel filter (not required for Fusion and Milan).
- Install a new engine air filter (not required on Focus).
- Check air filter restriction gauge, install a new air filter as necessary (Focus only).
- Install a new cabin air filter (if equipped).
- Change automatic transmission/transaxle fluid (except CVT transmission).
- Change automatic transaxle filter (except CVT, Five Hundred and Montego equipped with a 6-speed automatic transaxle).
- Change rear axle lubricant on all RWD vehicles.
- Change rear axle fluid (Class A Motorhome).
- Install a new accessory drive belt(s) (if a new belt has not been installed within the last 100,000 miles).
- Install new climate controlled seat cushion filters (if equipped) (Navigator, Freestar, Monterey and Expedition).
- Install a new climate controlled seat back filter (MKZ only).
- Inspect PVC for flow (3V engines).
- Lubricate steering linkage, suspension and ball joints (if equipped with zerk fittings).
- Install new non-sealed RWD front wheel bearings and seals (if new bearings and seals have not been installed in the last 100,000 miles).
- Lubricate the 4WD front axle shaft U-joints (if equipped) (F-250/350/450/550).
- Change front axle lubricant (4WD only).
- Change transfer case fluid (4WD only).
- Change automatic transmission/transaxle fluid on all vehicles equipped with a 4F50N, 5R44E, 5R55E, 5R555, TorqShift (with externally mounted remote filter) and CD4E transmission/transaxle. Install a new remote filter if equipped with a TorqShift transmission. Inspect automatic transmission fluid level using the fluid level indicator on all other vehicles (if equipped with an underhood fluid level indicator). Change the in-line service-installed transmission fluid filter (if equipped).
- Carry-out multi-point inspection (recommended).
