New pics of my truck with leveling kit, push bar, and exhaust installed
#33
Senior Member
Do you have a picture of the truck before you did the leveling kit? I am really wanting to do this to mine but would like to see a before and after shot to see the real difference. Truck looks Great!!
John
John
#34
Blue Chrome
Thread Starter
Join Date: Feb 2008
Location: Boston, MA
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
I do have pics of the truck before the leveling kit I will post them shortly when I have time. The leveling kit made a HUGE difference, it made the truck sit almost perfectly level.
#35
The truck looks great with the lift. I need to do that to mine. One question though...is your push guard legal with the local law enforcement as far as the front licence plate being visible? I know that might be a problem for me down here in Texas...
#36
Blue Chrome
Thread Starter
Join Date: Feb 2008
Location: Boston, MA
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
Honestly I don't know, but I think it is illegal. I think they have kits though to relocate your front plate higher or you could always just use your top bolts for the bottom brackets of your plate so you probably could see the plate but I'm unsure of that. I'll try to find out.
#38
Blue Chrome
Thread Starter
Join Date: Feb 2008
Location: Boston, MA
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
I was reading through some of the previous posts members had up about leveling kits. I forget exactly which member it was on here but they broke it down to each size and the amount of lift it will add to the front of the truck. I decided on the 2'' because the person said it levels out the back perfectly so I went along with it and it did. You can add leafs to the back of the truck if you wish to go higher than the 2'' or 2.5''. I do not recommend the 3'' leveling kit though because it puts to much stress on the front end and you will be going for various front end parts. So to give advice I suggest just searching leveling kits and see what you can find. Good luck.