Darren123

Thx for info, well here is what I know about truck as I just bought it 4 to 6 weeks ago, the people that I bought from sounded nice and said was a great truck, so within a week all brakes and front rotors needed to be changed, then the studdering and stalling started, truck has 256, 000 km and they said all maintained good....I fought it as the things I have found and seen I think they didn't do anymore then they had to, rrrr
So now I am trying to change oil and filter, fuel filter, air filter, and what I can do easy, the thing is that it pulls no codes, so would you think that maybe another code reader might pick up something, ? Thx for any or all info givin....

Darren123

Well guys, here is some info so far. I did unplug the 2 vct selenoid this morning and left it all day and not once it acted up. So my question to someone here is would I be able to plug only one back in to find out what one is bad, or this is something I should change both, thx
PS where is best place to buy them for good price, I am in Kimberley bc or go through Calgary and Edmonton often, thx

Darren123

Well guys another day with vct unplugged and was all good, no acting up. So like I asked before can I run truck with only one plugged back in to see what one is fried, thx

HeathMc

Not sure on that one. You could try it and let us know. I think you said you were going to do lockouts or I would probably replace both. The new ones have a check valve that is new and they are 45 apiece plus 20 for the seals, both motorcraft. Good luck.

Darren123

Here they are 100.72 plus 18.35 seal each omg rip off here in Canada....

poptop

Check Amazon might find them cheaper there. Or rock auto. Definitely change both. Check your repair manual I'm not positive but you might have to pull the valve covers to get at them on an 07 which can be a pita.I would also check the fpdm just do a search there's lots of info on it here.

HeathMc

Here's the listing on Amazon.

Darren123

I think they can be done with out taking valve covers off as there is a dust cover to remove, but will find out later today. I think the fpdm unit your talking about is the part above spare tire ? Well I have plugged in the vct back in on passenger side and all good still. As I thought when it would make the noise and run like **** it sounded like drivers side. I also went to check my tranny oil and the stupid last owner must have lost dip stick so he used a broken oil one to replace rrrrrrr. So I will be changing and checking lots on this truck aguess. I hope some of this info can help others....let you know when I plug other one back in....thx

Darren123

Thx guys, I'm ordering them tonight. Thx

Darren123

I just placed order and total was 180.97 to my door,