Need help Identifying wires, see pic
09-22-2009, 11:25 PM
#11
Junior Member
Thread Starter
Join Date: Aug 2009
Location: Oaklahoma
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Got the truck running!
Thanks guys for all the help!!!! Wires where from a previous install of a remote start system. I disconnected the wiring harness and had two new keys programed. The truck is running good. Thanks again.....
09-23-2009, 01:07 AM
#12
Junior Member
Join Date: Sep 2009
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
i did car audio install for 7 years.. that looks like a regular directed electronics type harness for the alarm system..
almost positive i know the problem.
the dei (directed electronics alarm) requires you to cut the starter wire for security or remote start.
all you have to do is find a large green (16ga or so) out of the ignition harness (the harness that comes out of where your key turns)
the wire should be severed. all you have to do is reconect it and your rig will start
almost positive i know the problem.
the dei (directed electronics alarm) requires you to cut the starter wire for security or remote start.
all you have to do is find a large green (16ga or so) out of the ignition harness (the harness that comes out of where your key turns)
the wire should be severed. all you have to do is reconect it and your rig will start
09-25-2009, 10:10 PM
#13
Junior Member
Thread Starter
Join Date: Aug 2009
Location: Oaklahoma
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Grgperrier you arer correct!!!
I reconnected the green 16 ga wire under the steering wheel and had two new keys programed by a local locksmith friend. Car started right up and now I'm working on the power steering and brakes. Thanks for the conformation and if you could recommend a good alarm system with remote start for my f-150 what would it be?????
Cheers,
Cheers,