carl292

Hey guys need some help,
Just swapped out my passenger side rotor\bearing on a 2007 4x2, cause I was getting some grinding noise. Took my time,everything went great and fixed the grinding. Took it for a slow ride and right away at low speeds I am getting a brake pedal pulse thump, it seems like every tire rotation. Took it apart, checked everything and put it back together. Went for short ride and noticed pulsing SEEMS to be gone , but not I have a ABS light. Tried to clear with my SCT tuner and it came right back. Thanks

carl292

Ok went to autozone to have the code read and C1297 came up as a speed sensor on the same side i worked on. Is there a test i can do to make sure? With my luck itll be something else and ill be out $110. whatcha guys think?

carl292

so no one has ever had this issue....

Especial86

iTrader: (1)

Check your abs sensor at the hub.. Unbolt it and wipe the crap off of it.. You should see a wire leading right to it.

KMAC0694

It's been 4 hours . . . wait a minute.

carl292

Wiped the grease of it and problem is still there.

carl292

Update- took the number 14 fuse out and that kills abs and lthe stuff. Truck ran great right away, so off to napa for abs sensor , swapped it out and same problem . WTF

K-ris

I'm having this issues right now and it's new sensor and a good hub rotor on a 2007 4.2 i checked the fuses and the wires for voltage

getterdun

I'd start by checking for OBD codes. If you get any codes let us know.