Need dimensions of 2 inch front level kit spacers
03-07-2013, 07:02 PM
#11
I am in need of more information. Can you take some pictures with measurements going from the center of one bolt to the center of another. 1 measurement needed and it should be the largest. If you measure from center to center of the three bolts(3 measurements) the number i am looking for you will have gotten twice.* I can not get a good enough measurement with the assembly assembled on the truck. The bolt that is farther away from the outside of the truck(hidden) is on a larger bolt circle diameter than the two that are more toward the outside(in plain view).
Hope that was not confusing. let me know if i need to re-explain.
Thanks, Jason
Hope that was not confusing. let me know if i need to re-explain.
Thanks, Jason
03-07-2013, 07:28 PM
#14
That should work, but with the angle I cant see if the tip of the tape is centered on the bolt or what line you went off of with the angled metal price in the way. Maybe if you did all measurements off of the 1 inch mark that would be easier to read. I am sorry to be such a pain in the ***.
03-07-2013, 07:51 PM
#16
That is perfect and it is what I have drawn on my computer but something else is at play witch I why I was having you measure it so much and in different ways. As you can see in pic the hole that is farthest away from center is close to the outside of the part and I have the od at 6 inches like in the picture you sent me. Is there anything that you can see/tell from your spacer that I cant.
03-07-2013, 08:08 PM
#18
I have it looking better with the bottom right hole properly distanced from the center but then that throws out the distance i need to maintain between the two bottom holes witch is larger. I am really trying to avoid taking this assembly off of my truck in order to get the info i need but it keeps looking this way. Are the holes on the other side of the spacer any different?
03-07-2013, 08:21 PM
#20
I have it looking better with the bottom right hole properly distanced from the center but then that throws out the distance i need to maintain between the two bottom holes witch is larger. I am really trying to avoid taking this assembly off of my truck in order to get the info i need but it keeps looking this way. Are the holes on the other side of the spacer any different?