Seth_skye_stx

Alright guys I have an 05 f150 STX 4x4 4.6l
I found some 17x9 vrock recons (0 offset, also heard high offset also 30mm?) Im not real knowledgeable in the offsets. Also with them a set of Hankook Mud terrain's 35x12.5. I know the rims will but not sure how much clearance ill have. Rear is stock height. The front has a 2" leveling kit. Found a 3" rear block kit. Also a 2" spacer kit all the way around. Any input helps Thanks!

Jreimnitz150

+0 offset is an "aggressive" offset and will definitely stick out past your fenders without running your 2" wheel spacers. Shouldn't need to do anything with the rear to clear 35"s but the wheel wells will be pretty filled out, if you have a 2" level up front they should clear as well. You might have to do a little bit of trimming on some plastics is all.

Seth_skye_stx

Ok cool deal thanks a lot. I should have them this week.

Jreimnitz150

Post up some pics when you get them on!

Seth_skye_stx

Yes sir will do!

Seth_skye_stx

Here you go.

Jreimnitz150

Looks good man!

Seth_skye_stx

Thanks

Fbcoach

DUDE! Truck looks awesome! Did you keep the wheel spacers on? That looks like a good amount of tire sticking out for a +0mm offset. How much trimming did you have to do with the 2" level, and how are the Hankooks?

Seth_skye_stx

Thanks man i love it totally changes it. (Aggressive stance) Never had wheel spacers never heard anything good about them unless its a show truck. I'm not 100% on the +0mm offset ill have to call and double check. I believe that's what i heard. I didn't have to trim absolutely nothing. My passenger side of steel bumper in pushed in about an inch. They scrub the plastic lip on the bumper only when i turn left. (Only temporary) Pull it out soon. The hankooks are so far so good. 60k tire. (Poss 65k) i had BF goodwrench M/T they were a lot louder tire roar. These are toned down but can still hear them and your radio. I have a loud system anyways so i rarely heard the BF M/T when i had them.