Need advice...
#1
Member
Thread Starter
Need advice...
Hello i posted a while about my truck not going into 4lo with the sotf and a ford wrench (hammer) was advised by a member here to remind my xcase shift motor who's boss... To no avail. So i looked up a new xcase shift motor online at my a local national parts shop (autozone) and found this...
http://m.autozone.com/drivetrain/transfer-case-motor/cardone-reman-transfer-case-motor/ford/f150-1-2-ton-p-u-4wd/2008/8-cylinders-w-4-6l-efi/22836_0_0/?location=
They also offer a dorman for +- $70.
My truck is a new to me 08 stx 4.6 with 137xxx.
Any opinions about the brand and overall satisfaction with this specific part or is there something better for my money? I.e. different brand?
As always thanks for the help!!!
http://m.autozone.com/drivetrain/transfer-case-motor/cardone-reman-transfer-case-motor/ford/f150-1-2-ton-p-u-4wd/2008/8-cylinders-w-4-6l-efi/22836_0_0/?location=
They also offer a dorman for +- $70.
My truck is a new to me 08 stx 4.6 with 137xxx.
Any opinions about the brand and overall satisfaction with this specific part or is there something better for my money? I.e. different brand?
As always thanks for the help!!!
#4
Moderator (Ret.)
Not sure it will do much better there in the way of responses...my guess is that no one here as any specific recommendations pertaining to xcase brand preference.
The following users liked this post:
David Golden (05-12-2016)
#5
Senior Member
I've never dealt with their TC motors, but Cardone has a pretty good operation going on up there in PA. Sold many of their parts over the last 12 years and not very many came back. They also offer a warranty on it if it starts acting up.
The following users liked this post:
David Golden (05-12-2016)