mystery electronic box near rear axle
#1
Junior Member
Thread Starter
Join Date: Nov 2009
Location: outside Albany, NY
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
mystery electronic box near rear axle
I just had to use my spare for the 1st time. I noticed a desintegrated electonic box mounted on the frame above the spare. I assume it has to do with emissions. Anyone know what it is and where to get a scematic and/or part#?
#2
My guess would be that it is part of the Evaporative Emission Control System (EVAP). Specifically, the EVAP Canister Assembly is what is located above the spare. I'm not real knowledgeable about the system, but it basically absorbs fuel vapors and dumps them into the intake manifold where they mix with the incoming air/fuel mixture. As for a part #, I have no idea. Hope this helps.
#4
FLARESIDE MAN !!!
there are evap parts back there, there is also a fuel pump driver module
measures about 4"x4" in size one connector.. it is commom for these to rot. people dont see it until the truck don't start..
#5
Junior Member
Thread Starter
Join Date: Nov 2009
Location: outside Albany, NY
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
sounds right
Trending Topics
#8
Here is a link showing the issue with these modules.
http://www.fordf150.net/articles/idx...ition-DTC.html
http://www.fordf150.net/articles/idx...ition-DTC.html
#9
Here is a link showing the issue with these modules.
http://www.fordf150.net/articles/idx...ition-DTC.html
http://www.fordf150.net/articles/idx...ition-DTC.html
DORMAN, I find it interesting that the Tinman from the Wiz of Oz was rusting at all... Industrial tin plating is used to coat steel to protect it from corrosion. http://www.reliableplating.com/tin.html