Muffler Only Or Cat Back
#1
Member
Thread Starter
Join Date: Mar 2008
Location: Paso Robles, Ca
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
Muffler Only Or Cat Back
Im Looking To Add Magnaflow To My Possible Upgrade List And Dont Know What I Should Be Looking At. (cat Back Or Muffler Only) Why Should I Buy An Expensive Cat Back Kit ($300 To $800) When I Can Get The Same Muffler A Lot Cheaper And Use My Stock Pipe. My Stock Pipe Is 2.5" And Is Mandrel Bent. Has Anyone Here Done This.
#3
Member
Thread Starter
Join Date: Mar 2008
Location: Paso Robles, Ca
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
Is That Really Worth Spending $500 More Over Just Buying The Magnaflow Muffler For Around $100? Are The Performance Gains Between 3" And 2.5" Really That Much?
#4
Resident A-hole
I went with a custom bent true dual 2.5" with 2 magnaflow mufflers. I would do that. The whole dual system only cost me 400.00 nistalled. No its not mandrel bent, but this setup is good for 650 hp, which I doubt the truck will ever see.
#5
Member
Thread Starter
Join Date: Mar 2008
Location: Paso Robles, Ca
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
Thanks For The Advice Guy's But Has Anyone Here Ever Just Changed Out The Stock Muffler To A Magnaflow And Kept The Stock Tail Pipe? If So, What Did You Use And How Does It Work?
#6
Senior Member
Join Date: Mar 2008
Location: Statesboro, Georgia
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
check out this: http://www.youtube.com/watch?v=Ni-cUPcSAxk that's my truck with AERO exhaust. I think that's enough in my opinion. any louder and I'd go deff. my brother has a 2000 C5 corvette with cut-outs and that thing is INSANELY loud.
http://www.youtube.com/watch?v=4CCzQctu4wg
http://www.youtube.com/watch?v=4CCzQctu4wg
#7
Member
Thread Starter
Join Date: Mar 2008
Location: Paso Robles, Ca
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
check out this: http://www.youtube.com/watch?v=Ni-cUPcSAxk that's my truck with AERO exhaust. I think that's enough in my opinion. any louder and I'd go deff. my brother has a 2000 C5 corvette with cut-outs and that thing is INSANELY loud.
http://www.youtube.com/watch?v=4CCzQctu4wg
http://www.youtube.com/watch?v=4CCzQctu4wg
Trending Topics
#8
Member
Thread Starter
Join Date: Mar 2008
Location: Paso Robles, Ca
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
#9
Resident A-hole
I have installed Magnaflows in the stock location. The maggie is smaller so you will have to buy pipe to put it in. I am going to do it for the wifes Avalanche too. That will be in a couple of weeks. I will be changing the muffler and tailpipe though.
#10
Member
Thread Starter
Join Date: Mar 2008
Location: Paso Robles, Ca
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
HOW DID IT SOUND AND PERFORM.