Morimoto XB LED fog lights
#11
Frito Bandito
#13
Can your please post a picture of the back of the fog mount on the driver side? My mounting tab on the driver side would require the new fogs to be mounted upside down which I wouldn't do.
..I know I'm not the only one having this issue.
..I know I'm not the only one having this issue.
#16
#17
TOTM November 2019
iTrader: (2)
Attachment 404659
Attachment 404660
Here you go. No modification needed. The only thing I can think of to complain about is the hardware isn't stainless, and I couldn't use the factory hardware.
Attachment 404660
Here you go. No modification needed. The only thing I can think of to complain about is the hardware isn't stainless, and I couldn't use the factory hardware.
Last edited by Summers22; 12-06-2015 at 08:03 PM.
#20
TOTM November 2019
iTrader: (2)
LOL, you can't flip it........thats where the issue is. The passenger side factory bucket bracket will be on the wrong side as the Morimoto fog assembly. Look at what Tfolks206 had to do in this thread: https://www.f150forum.com/f83/morimo...s-08-a-321547/
Before you do that, if the beam quality is good, then email TRS and ask them if they can be mounted upside down with no loss in performance.
Before you do that, if the beam quality is good, then email TRS and ask them if they can be mounted upside down with no loss in performance.