looking to buy fx4 2004
04-22-2013, 07:48 PM
#26
Thanks guys pretty happy the way it turned out so far.
Pulled the interior apart to give it a good cleaning. All seats front and back 100 percent out working on the consol. Is it possible to hook up 2009 f150 seats 10 way power and cooled and heated ? I found the seats front and back for 1500.00?
So i finally got the adaptor for the compression test from the mac tool guy and did com pression test the numbers are.
Drivers side front of engine to back 155 psi,160psi,165 psi,170psi
Passanger side same order 150 psi,165 psi,175 psi,170 psi
Plugs installed truck runs 100 percent better. Small issue when i drove it hard and stopped hard it would stall if i drove nice it would not what do you guys think the stalling is?
Going to do all four corners of the brakes pads and rooters tomorow and air and fuel filters.do you neeed a spevial tool for the fuel filter ?
Pulled the interior apart to give it a good cleaning. All seats front and back 100 percent out working on the consol. Is it possible to hook up 2009 f150 seats 10 way power and cooled and heated ? I found the seats front and back for 1500.00?
So i finally got the adaptor for the compression test from the mac tool guy and did com pression test the numbers are.
Drivers side front of engine to back 155 psi,160psi,165 psi,170psi
Passanger side same order 150 psi,165 psi,175 psi,170 psi
Plugs installed truck runs 100 percent better. Small issue when i drove it hard and stopped hard it would stall if i drove nice it would not what do you guys think the stalling is?
Going to do all four corners of the brakes pads and rooters tomorow and air and fuel filters.do you neeed a spevial tool for the fuel filter ?
Last edited by superdutyfan; 04-22-2013 at 07:53 PM.
04-22-2013, 08:10 PM
#27
Thanks guys pretty happy the way it turned out so far.
Pulled the interior apart to give it a good cleaning. All seats front and back 100 percent out working on the consol. Is it possible to hook up 2009 f150 seats 10 way power and cooled and heated ? I found the seats front and back for 1500.00?
So i finally got the adaptor for the compression test from the mac tool guy and did com pression test the numbers are.
Drivers side front of engine to back 155 psi,160psi,165 psi,170psi
Passanger side same order 150 psi,165 psi,175 psi,170 psi
Plugs installed truck runs 100 percent better. Small issue when i drove it hard and stopped hard it would stall if i drove nice it would not what do you guys think the stalling is?
Going to do all four corners of the brakes pads and rooters tomorow and air and fuel filters.do you neeed a spevial tool for the fuel filter ?
Pulled the interior apart to give it a good cleaning. All seats front and back 100 percent out working on the consol. Is it possible to hook up 2009 f150 seats 10 way power and cooled and heated ? I found the seats front and back for 1500.00?
So i finally got the adaptor for the compression test from the mac tool guy and did com pression test the numbers are.
Drivers side front of engine to back 155 psi,160psi,165 psi,170psi
Passanger side same order 150 psi,165 psi,175 psi,170 psi
Plugs installed truck runs 100 percent better. Small issue when i drove it hard and stopped hard it would stall if i drove nice it would not what do you guys think the stalling is?
Going to do all four corners of the brakes pads and rooters tomorow and air and fuel filters.do you neeed a spevial tool for the fuel filter ?
04-22-2013, 08:18 PM
#28
Thanks kingranch4life !!! I put some injector cleaner in but havn't driven it long enough to do anything yet i have only 10 miles on it since putting it in. Got to get the brakes done first. And you are right truck was nice when this woman had it and she passed away (RIP) and her son drove the crap out of it. Got it impounded he could not pay impound fees it went to auction and thats when we bought it.
Last edited by superdutyfan; 04-22-2013 at 08:21 PM.
04-22-2013, 09:34 PM
#29
Thats a nice truck for the price! I wouldn't mind buying one that cheap and just working on it, i'm sure its alot less stressful than doing it on a $20,000+ truck.
04-22-2013, 10:27 PM
#30
i have a 2009 f150 king ranch i havn't hardly opened the hood on. 215k km on it. And a 2013 f350 ps kingranch have never opened the hood on. Inwanted to see what the fuss was with these plugs and it wasnt as bad as i thought. 7 broken need to be extracted. Still playing around with the stalling issue if i start it let run its fine. If i rev it up a few times and release the pedel and it stalls or i have to feather it a few times and let the rpm kind of settle down at around 600 rpm and drops down to 300 rpm and then rises to about 700 rpm on its own and stays running ? 
Our Ford Collection