F150_Feste

ryan, I don't have any other pics yet, but will take some soon to help you out. Should be able to give you the specs and information on the wireless wiring too.

ryanralston07

Thanks, I appreciate it!

texan458

Behind the grill definitely look nicer than I thought it would. I might put off the bull bar seeing as how I couldn't decide on the black or chrome one anyhow. Anyone got any pics of the KC lights behind an aftermarket grill?

ryanralston07

I'd like to see some lights behind a roush grill or something similar if anybody has it...

posttal

I'm very..very curious as to how the PIAA wireless switch is linked to your visors.Do you program it the same way that you program the door opener?I like that idea..I like it a lot

You wouldn't happen to have any part numbers ? I'm assuming the wireless reciever is a relay activated by the visors transmitter..and if so you could have the relay do anything you want..turn on the fog lights or even a light in the rear of a truck cap ?? hmmmm

grassmanfx4

I dont have a roush grill but i do have an FX2 grill which is very similar.

ryanralston07

Thanks grassman, I was wondering how well you could see the lights behind a grill like that and that helps really well.

F150_Feste

Ryan, Here are the pics of how I mounted the PIAA lights in front (below). I also didn't use the wiring that came with the PIAA lights, as I mentioned before I bought a wireless (remote) wiring kit from Pep Boys (Pilot is the brand, I didn't see any product numbers or anything). The length of the bar is 48" and just drilled/matched up the bolt holes under the headlights (had to remove the lights to get to it). I hope the pics help, if you need more information, just PM me.

Posttal, As for how I used the PIAA wiring on the lights to go to my visor (homelink), it is exactly like you do for garage door opener...only diff was I had to program one button on visor in the "on" position and another in the "off" position with my remote for the lights, leaving me with one for my gate to open/close.

ryanralston07

Thanks for the help! I want to do the same mounting design, but up higher and with a bar under it also for stability.

Reece

that looks nice. Does it distort the light at all. DId you use the same install method as F150 Feste did? what kind of lights are those