Leveling kit installed! Now some questions.
#1
Leveling kit installed! Now some questions.
I got around to installing my 2'' Autospring leveling kit. It didn't take long and for the most part was very straight forward. I do have some questions, however. Keep in mind I haven't gotten an alignment yet.
I noticed when I hit SOME bumps, not all, I hear a clunk sound from the drivers side front wheel. Does the kit require any "setting in" period? Should I hear any noise vs stock? I checked and double checked everything was tight. Used a large cheater bar with all of my weight on it for the huge nut/bolt at the bottom.
Anyway, here are some pics.
I noticed when I hit SOME bumps, not all, I hear a clunk sound from the drivers side front wheel. Does the kit require any "setting in" period? Should I hear any noise vs stock? I checked and double checked everything was tight. Used a large cheater bar with all of my weight on it for the huge nut/bolt at the bottom.
Anyway, here are some pics.
#6
Senior Member
Yours seems very noise high for just a 2" bro... You sure they sent the right one? If they accidentally sent you a 3" the noise your hearing could be your coil spring contacting your upper a arm when it drops
#7
275/65-18. Stock FX4 wheels/tire size.
And I thought it looked a little high too...but the box says 2'' lift. Maybe they put the wrong one in the box? Or the rear end suspension could be a little more worn. The previous owner did a lot of towing/hauling.
And I thought it looked a little high too...but the box says 2'' lift. Maybe they put the wrong one in the box? Or the rear end suspension could be a little more worn. The previous owner did a lot of towing/hauling.
The following users liked this post:
fordfreak84 (03-10-2013)