dufx4

315/70/17. Your tire would only be about .1 inches smaller so you will probably be rubbing as well. I would pick up a dremel with plastic cutting wheels from Lowe's and take it back when you're done =)

Hopefully you won't have to cut metal. Post back and let us know how it went for you.

KingRanch4Life

iTrader: (2)

22's and 35's with a 2.5" autospring level kit.... 3" rear block....
ROCKSTARS ARE NOT RECOMMENDED!!

godsey23

Well got them on and everything went pretty smooth. I couldn't get any better pictures because it got dark on us.

It was rubbing at full lock so I took the drimel to it and cut about 2 inches up from the bottom of the wheel well. Right next to the outside of wheel on the back it still rubs but I'm not sure how to fix it just yet. It probably sounds a lot worse than it actually is but I still want to fix it. It only rubs at half lock in reverse too

Redneck4x4

i leveled mine 3 inches and had to trim my fenders to fit 35's (315/70/17's) but i like the look

Biltnotbot07'

I've settled for 33/12.5r20

80575

From what it seems, I'm guessing I wouldn't be able to tuck 35s with a -12 offset?

CPT150

Thought about Rockstar, but went with XD Monster

dufx4

Not without a decent amount of trimming unfortunately.

80575

I feel like it would be a pretty good chuck of trimming, it would look better than a 33 I feel.