Lets try this again! Keypad Entry ?s for 04 FX4
#11
Senior Member
Found it! It's close to the original recommendations in the picture, but it's behind your driver's side B-pillar trim (driver's side corner of the back wall plastic trim piece). From the service manual:
VEHICLE SECURITY MODULE - REGULAR CAB
Removal and Installation
CAUTION: Prior to the removal of the vehicle security module, it is necessary to upload the module configuration information to the diagnostic tool. This information needs to be downloaded into the new module once installed.
VEHICLE SECURITY MODULE - REGULAR CAB
Removal and Installation
CAUTION: Prior to the removal of the vehicle security module, it is necessary to upload the module configuration information to the diagnostic tool. This information needs to be downloaded into the new module once installed.
- Remove the LH B-pillar trim panel.
- Disconnect the 2 vehicle security module electrical connectors.
- Remove the 2 screws and the vehicle security module.
- To install, reverse the removal procedure.
#12
Senior Member
Thread Starter
Your the man!!! thanks for looking for me! i couldnt find anything on this....looks like when i get off duty tomorrow im taking B billar trim out!! thanks again!