Let's see those back up cameras.
#21
Senior Member
This is in a 2011, but seeing as its a universal install I thought it might be appropriate. The camera seems to get me the full 480 tvl and it's paired with a rear view mirror with lcd screen. I also wired it up to a switch. Total cost was about $150.
#22
Senior Member
Thread Starter
Alright guys I have a problem, I tried to install my back up camera yesterday but I ran out of time. Now the problem is, when I connected the camera the the stereo, I have a avh x4500bt pioneer, and I put the truck in reverse, the screen doesn't change to the camera. But I can turn the camera on and off manually on the HU. What could be the problem? I have the ground connected to the black wire of the reverse tail light and the positive to the black/purple wire.
#23
Senior Member
I got the same one. Super small and efficient ^.^
#24
Senior Member
How is it connected to the stereo? Via rca or blue wire?
#25
Senior Member
iTrader: (1)
Originally Posted by 04 Lucho
Alright guys I have a problem, I tried to install my back up camera yesterday but I ran out of time. Now the problem is, when I connected the camera the the stereo, I have a avh x4500bt pioneer, and I put the truck in reverse, the screen doesn't change to the camera. But I can turn the camera on and off manually on the HU. What could be the problem? I have the ground connected to the black wire of the reverse tail light and the positive to the black/purple wire.
https://www.f150forum.com/f4/afterma...163504/index7/
Last edited by Especial86; 03-24-2016 at 09:50 PM.
#26
Senior Member
Thread Starter
I got it to work, I didn't connect the reverse trigger wire from the HU. Unfortunately the camera is to big to fit where I want it, so I'm going to buy a tailgate handle with the hole for the camera and buy a camera.
#27
Senior Member
New backup camera in the tailgate installed and looking like factory install...
Picture doesn't do this justice, it is a sharp image. Really does look good. I will be adding the backup sensors today.
#29
Senior Member
I'd check your power and ground; where are you drawing them from?
#30
I'm drawing from my driver side reverse light. Have my power hooked up to the black/violet and ground to the black. You think take it back apart and make sure my connection is good?
Last edited by jon06xlt; 03-25-2016 at 08:08 AM.