integrated seat belt removal??
#1
Junior Member
Thread Starter
Join Date: Nov 2007
Location: Ohio
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
integrated seat belt removal??
Just got new seat covers for my 05 STX SC. It has the 40/20/40 seat with center rest and integrated belts. Looks like I'll need to disconnect one end of the seat belts, in order to put the cover over the belt box.
Can anyone tell me the best way to go about it?
Can anyone tell me the best way to go about it?
#4
Moderator (Ret.)
In the Ford Factory repair manual, it shows how to remove the seat belt cover (next to headrest). This part is easy....then remove the upper seat cover to gain access to the belt assembly which is bolted to the upper seat back assembly. Looks like the only way to this is to remove the upper seat cover.
Perhaps GATORB8 (who has an "electronic" copy) will offer to upload it here. My paper copy provides pictures and written steps, but I do not have a way to scan it and upload.
Perhaps GATORB8 (who has an "electronic" copy) will offer to upload it here. My paper copy provides pictures and written steps, but I do not have a way to scan it and upload.
Last edited by Mod (Ret.); 05-11-2010 at 10:57 AM.
#5
Junior Member
Thread Starter
Join Date: Nov 2007
Location: Ohio
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
What about the other end of the belt..it seems to unbolt from the seat easy enough..not sure about disconnecting the sensor. No luck finding anything other than owners manual yet. Need to know how to get the recline **** off..
Anyone with a link to a service manual would be much appreciated!
Anyone with a link to a service manual would be much appreciated!