Intake Manifolds
#11
none.
Join Date: May 2007
Location: West Palm Beach, FL
Posts: 3,840
Likes: 0
Received 97 Likes
on
78 Posts
sct was started by a ford powertrain engineer.......what do you want to know about sct? the good programming guy at diablo left a long time ago. you were told to run a premier trans because its advertised........Circle D rebuilds precision industries stuff.
#12
Those are the ones I found, the Pro Weld heads. That's why I wanna build up my truck, because you just don't see these trucks on the strip. I don't care if it ain't a 10 second truck, I just wanna lay it on some unsuspecting car junkies that think all trucks are slow. I'm doing all the basic bolt on performance parts first then saving money to do the hefty engine stuff. Supercharger, heads, cam. Also, if any of you have seen the Squires universal turbo systems, do you think it would be possible to run a supercharger and one of their turbos on the truck? Or maybe even an application specific turbo system with the sc? I don't think the second would work b/c of room in the engine compartment, but I could be wrong. With the universal I could run it back by the exhaust like they did on Trucks with the red Lightning.
#13
South County Bad Boy
Thread Starter
Join Date: Mar 2009
Location: Grasonville, MD
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
It is possible to do this if you have enough money. You would have to get a roots type supercharger and then use the turbo as you intake. For the best combination i would recomend go get a kenny belle blower and then run a sts turbo into it. The stock motor would never hold that much power. If you were planning on doing this you are going to need better pistons and a whole new bottom end. But in the end you would have one hell of a ride. YOu could easily be 10 or even 9 second truck on motor.
#15
South County Bad Boy
Thread Starter
Join Date: Mar 2009
Location: Grasonville, MD
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
really? i emailed them and everything and they said they werent planning on making a blower and they dont have it listed on their site or anything.
#17
South County Bad Boy
Thread Starter
Join Date: Mar 2009
Location: Grasonville, MD
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
I just don't understand lol. How did you get it? Like what site or store did you get it from? The only truck like ours on their site is on the project vehicles page and I even emailed them about it.