Intake gasket on 07 xlt 4.6
#2
Former Powerstroker
its pretty straight forward. There are 16+ bolts to remove on the intake and it lifts off. Just remove all the other stuff attached to it. Also the EGR tube is not flexable in the least bit and it is really hard to get off. So yeh make sure you remove it and not gently move it out of the way. Older 4.6s could be moved slightly. Mine broke off.
Also make sure you find out all the correct torques too. Good luck.
I replaced mine for a coolant leak. Mine is still leaking from the manifold its self. I need to replace the whole thing. So keep an eye out for that.
Also make sure you find out all the correct torques too. Good luck.
I replaced mine for a coolant leak. Mine is still leaking from the manifold its self. I need to replace the whole thing. So keep an eye out for that.