I effed up bigtime
#11
Originally Posted by Turkey Hunter
If You can hook the spring back right it may be alright but it will be hard to determine exactly how that goes back 2gether.
#12
'08f150stx
If you can get it to move far enough, take it and get the code read, unless you can do it yourself (or know someone who can read the cel code) Turkey may be right on, but if that does not fix it, just changing parts while guessing gets to be darn expensive (ask my do it I'll do it myself son)
#13
Originally Posted by '08f150stx
If you can get it to move far enough, take it and get the code read, unless you can do it yourself (or know someone who can read the cel code) Turkey may be right on, but if that does not fix it, just changing parts while guessing gets to be darn expensive (ask my do it I'll do it myself son)
#14
'08f150stx
I hope you know you can get the codes read for free (if you can get it there) at an autozone, or places like that......don't know about napa......call first before you go anywhere
#15
Originally Posted by '08f150stx
I hope you know you can get the codes read for free (if you can get it there) at an autozone, or places like that......don't know about napa......call first before you go anywhere
#16
Senior Member
iTrader: (1)
If I was you I would pull the throttle body and get it on a table, take a good look at the parts you have messed with and see if you can tell how they would logically move together in a uniform manner..... Also google the part number and see if there is an "exploded view diagram" of the throttle body and it's parts.... Good luck!.... By the way if it's just your throttle position sensor that you messed with and a spring shot out of that, then you really should get a new one.
#17
Originally Posted by Especial86
If I was you I would pull the throttle body and get it on a table, take a good look at the parts you have messed with and see if you can tell how they would logically move together in a uniform manner..... Also google the part number and see if there is an "exploded view diagram" of the throttle body and it's parts.... Good luck!.... By the way if it's just your throttle position sensor that you messed with and a spring shot out of that, then you really should get a new one.
#19
12 Second Truck
Here are the instructions on how the spring and assembly go back together.
http://lib.store.yahoo.net/lib/yhst-...818/T13002.pdf
If the throttle position sensor has died then the new part runs about $90. Napa carries the correct Motorcraft part. I seriously doubt this is the problem. Sounds like you just put the spring assembly back together wrong.
http://lib.store.yahoo.net/lib/yhst-...818/T13002.pdf
If the throttle position sensor has died then the new part runs about $90. Napa carries the correct Motorcraft part. I seriously doubt this is the problem. Sounds like you just put the spring assembly back together wrong.
Last edited by Blown Ford; 01-04-2012 at 12:27 PM.
#20
Originally Posted by Blown Ford
Here are the instructions on how the spring and assembly go back together.
http://lib.store.yahoo.net/lib/yhst-...818/T13002.pdf
http://lib.store.yahoo.net/lib/yhst-...818/T13002.pdf