Topic Sponsor
2004 - 2008 Ford F150 General discussion on the 2004 - 2008 Ford F150 truck.

I Can't Believe I'm working on a New Truck

Thread Tools
 
Search this Thread
 
Old 02-18-2009, 01:20 PM
  #11  
Moderator (Ret.)

 
Mod (Ret.)'s Avatar
 
Join Date: Sep 2008
Location: Lake Mary Florida
Posts: 9,460
Received 474 Likes on 374 Posts

Default

Originally Posted by obusnizzle
a purolator and/or motorcraft will do just fine.....K&N filters are a frickin gimmick and a headache.
And so starts the myth yet again.....sigh.
Old 02-18-2009, 02:29 PM
  #12  
none.
 
obusnizzle's Avatar
 
Join Date: May 2007
Location: West Palm Beach, FL
Posts: 3,840
Likes: 0
Received 98 Likes on 78 Posts

Default

Originally Posted by Bucko
And so starts the myth yet again.....sigh.
sure, im wrong....ive run K&N filters, OEM Filters, S&B Filters, and now a volant filter in my truck. I honestly dont see the point....Why bother? why waste time cleaning, waiting to dry, oiling, letting sit, removing excess oil, just to claim a K&N filter? Think about it, over time his filter will collect dust, where is that dust going? Do you actually think cotton gauze is going to hold it all? do you really think that the oil is actually going to be retained? How many years do the old skule guys use paper filters in similar situations? how many of their trucks puked due to misc sand? Our trucks are sold in the middle east with the SAME filter that we get....do they have problems? Ford spent millions developing their stuff, they do through R&D with filters just like everything else, just like the oil filters that they use which happen to be some of the best filters money can buy...and some dudes from cali come along with greasy air filters and claim that they are the best? three cheers for capitalism.
Old 02-19-2009, 11:54 AM
  #13  
UplandgameDave
Thread Starter
 
UplandgameDave's Avatar
 
Join Date: Feb 2009
Location: Newbury Park, CA.
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default Two things learned

First, the filter manufacturer's Tech line says that it would be highly unlikely that one could over oil the filter. As oil would have to be running out of it. Going on to say that the over oiling and or MAF thing is a Wives Tale. Second, the problem only cleared up when I removed the MAF Sensor from the vehicle and repeatedly sprayed it with cleaner, then drove the vehicle for several miles. My thoughts are that the Sensor was the cause, cleaning it was the fix, and that my truck will be best served with the special filter installed for off road and a normal filter for street. The shop vac thing is wrong based on the fact that you rinse with low pressure tap water and allow to dry naturally, or damage the cotton batting which is very delicate evidently. The part that is still up in the air for me is that I was told, by the Tech. line, to run the filter dirty as it protects better with some dirt on it. So I think my switching back and forth may hamper that healthy acumulation.



Quick Reply: I Can't Believe I'm working on a New Truck



All times are GMT -4. The time now is 10:50 AM.