How to replace interlock shifter solenoid?
06-19-2009, 04:34 PM
#12
Junior Member
Join Date: Jun 2009
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Stumbled on to your post with a similar problem, my shifter is sticking going in & out of Park. Solenoid works fine, but plunger sticks at times as well. Pulled cable off shifter and had same results. Any advise would be appreciated.
06-19-2009, 11:34 PM
#14
Member
Join Date: Dec 2007
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
AAK625,
Just out of curiosity, why are you replacing the solenoid. I didn't think that it was possible. My cruse control went out on me about a year ago and and from that point on I was able to put the truck into gear without having to press down on the break. Ford told me that it was the solenoid that had a short in it and failed in the open position, which was the cause of the problem and what was allowing me to put the truck right into gear. They also told me that I would have replace the whole center shifter assembly to fix the problem.
I have the same truck as yours. And now knowing that I can just replace the solenoid and not the shifter I think i'll take a swing at it and see if that fixes the problem
Just out of curiosity, why are you replacing the solenoid. I didn't think that it was possible. My cruse control went out on me about a year ago and and from that point on I was able to put the truck into gear without having to press down on the break. Ford told me that it was the solenoid that had a short in it and failed in the open position, which was the cause of the problem and what was allowing me to put the truck right into gear. They also told me that I would have replace the whole center shifter assembly to fix the problem.
I have the same truck as yours. And now knowing that I can just replace the solenoid and not the shifter I think i'll take a swing at it and see if that fixes the problem
06-20-2009, 10:46 PM
#16
Auto-illiterate.
Thread Starter
Well, for a few weeks I've been unable to shift out of park. The brake pedal doesn't lower the white plunger, allowing me to shift. I've had to manually push it down. Ford wants to replace the shifter priced at $400 and didn't quote me on the labor. I've tried testing all the fuses and they're good. At $56 after shipping from TascaFordParts.com, I'm willing to see if that's the problem. If not, oh well.
I'm going to attempt the job this week. Wish me luck.
I'm going to attempt the job this week. Wish me luck.
10-08-2010, 03:04 PM
#17
Junior Member
Join Date: Oct 2010
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
I find myself having the same issue and also need to replace this solenoid. Can you tell me how the install went? Also, the pictures ATOM provided on the thread are no longer available, showing some specifics. DO you happen to still have?
Thanks
10-09-2010, 11:50 AM
#19
Junior Member
Join Date: Jul 2010
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
my 05 consol shift is doing the same thing sticks in park was told the brake light switch attached to the brake pedal was the problem replaced that no such luck! let us know how it goes this is a pain to screw wit everytime i want to shift outta park....and the light switch was $70 from ford
10-10-2010, 10:46 AM
#20
Auto-illiterate.
Thread Starter
That was one of the first things the guys on here told me to check. The pedal switch, the fuses, and the solenoid/actuator should be the only culprits. I don't recall anything else being suggested.
I'll try to find the appropriate part number for the solenoid. Taking into account the fact that I am not auto-inclined, it was very easy to replace. A few screws and a plug.
I'll try to find the appropriate part number for the solenoid. Taking into account the fact that I am not auto-inclined, it was very easy to replace. A few screws and a plug.
