How to replace interlock shifter solenoid?
#1
Auto-illiterate.
Thread Starter
How to replace interlock shifter solenoid?
Hey everyone, hope you're all doing well. Does anyone know how to replace the interlock shifter solenoid?
Thanks for your time,
Anthony
Thanks for your time,
Anthony
#5
Auto-illiterate.
Thread Starter
I know it controls the tab, but I don't know exactly where it is in the shifter block or how to get the shifter out without breaking something.
Here's the part:
Be advised, the above part is for the COLUMN SHIFTER. They sent me the wrong one the first time. This is NOT for the flow through shifter.
Here's the part:
Be advised, the above part is for the COLUMN SHIFTER. They sent me the wrong one the first time. This is NOT for the flow through shifter.
Last edited by AAK625; 10-09-2010 at 09:14 AM. Reason: Wrong part for flow through shifter.
#6
well i would just take the shifter out, it comes out with 4 bolts, and 1 or 2 wiring connectors, and then you can pop off the shifter cable and unhook it from the front. MAKE sure to put the truck in drive, then pop off the cable, and take it out. should be easy to swap it then. here's a pic of the shifter out, you can see 2 bolts, then 2 more on the other side. if you don't feel comfortable doing it, take it in, if you were to break the retaining clip on the front part that holds the cable in position, your looking at another 45 bucks. i would guess 1/2 labor to install the solenoid
Last edited by ATOM; 06-12-2009 at 06:25 PM.
Trending Topics
#9
#3 just take a wide flat tipped screwdriver and slide it between and twist carefully, it will pop right off, it will take a good amount pressure, you won't break it
#4 slip a tiny flat head and pry up on the tab and the cable slides right up and out
here this help ya?
#4 slip a tiny flat head and pry up on the tab and the cable slides right up and out
here this help ya?
Last edited by ATOM; 06-14-2009 at 10:51 PM.