headlights question need help
#1
headlights question need help
OK guys I have a stupid question. My low beams work but when I switch to high beam only the left side works. Do I need to just change the bulbs or do I have a different problem? Also is there only one bulb for the hi and lows
#2
Senior Member
Did you look in your manual? It lists all replacement bulbs. One bulb, two filaments.
youtube.com/watch?v=gb3gJ-rTSp8
youtube.com/watch?v=gb3gJ-rTSp8
#3
Senior Member
Sounds like bulbs to me but usually it's the low beam that goes out (except it does happen with the highs from time to time). From memory, I believe high beams use 1 fuse (F35 - 20A) so it's more likely a broken wire, plug contacts bad, or bulb... I'd start at the bulb (as I'm more convinced it's probably just that).
Last edited by homer; 01-07-2015 at 01:31 AM.
#4
Mark
iTrader: (1)
yeah... what homer said.. and do not touch the new bulb tip with your fingures
The following users liked this post:
homer (01-10-2015)
The following users liked this post:
techrep (01-09-2015)