Headlight alignment
05-04-2010, 08:03 PM
#2
Member
Join Date: Sep 2009
Location: NC
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Per the manual:
Park truck on flat level surface.
Park front 25 ft from a verticle falt wall. Measure from gournd to middle of head light.
Measure same distance on wall.
There are 4mm screws on the back of the head light to adjust.
Get the center of the beam to the mark on the wall.
Some people only park 8ft from a wall and do ths same procedure.
It's easy.
Park truck on flat level surface.
Park front 25 ft from a verticle falt wall. Measure from gournd to middle of head light.
Measure same distance on wall.
There are 4mm screws on the back of the head light to adjust.
Get the center of the beam to the mark on the wall.
Some people only park 8ft from a wall and do ths same procedure.
It's easy.
I need to fix it
05-05-2010, 10:19 AM
#4
Per the manual:
Park truck on flat level surface.
Park front 25 ft from a verticle falt wall. Measure from gournd to middle of head light.
Measure same distance on wall.
There are 4mm screws on the back of the head light to adjust.
Get the center of the beam to the mark on the wall.
Some people only park 8ft from a wall and do ths same procedure.
It's easy.
Park truck on flat level surface.
Park front 25 ft from a verticle falt wall. Measure from gournd to middle of head light.
Measure same distance on wall.
There are 4mm screws on the back of the head light to adjust.
Get the center of the beam to the mark on the wall.
Some people only park 8ft from a wall and do ths same procedure.
It's easy.
Craig