VegasF150

I've installed some additional amber lights for when i'm on a construction site. I want to tie them in with the harzard switch. I've location the wire harness that it's in the steering column. There are a few different wires in it. Does anyone know what color the wire is that from the hazard switch? Anyone with a service manual?

boilerup15

I will look in the morning in my manual and report back to you, I should be able to find it for you.

VegasF150

Any luck locating the wire color?

GATORB8

There is no hazard wire, the hazard button is part of the multifunction switch and the turn signal circuit is controlled by the hazard button internally in the multifunction switch.

boilerup15

What he said...There is a blue and a white/red wire that run to the switch. Then from the switch there is a :
Green/White wire that goes to Left Front Turn Lamp
Green/Orange goes to Left Rear Turn Lamp
White/Blue goes to Right Front Turn Lamp
Orange/Blue goes to Right Rear Turn Lamp.

Hope this helps...

VegasF150

Much appreciated... thank you.