Gryphon Programmer
#43
#44
MGD-
everytime you share information on this forum, i always get that light bulb like it all clicks and makes sense! in your expert opinion what tunes would you go with?
i have 35's
true dual maggies with X pipe
a "not-so-cold air intake" (as cold as the air can get here in AZ)
everytime you share information on this forum, i always get that light bulb like it all clicks and makes sense! in your expert opinion what tunes would you go with?
i have 35's
true dual maggies with X pipe
a "not-so-cold air intake" (as cold as the air can get here in AZ)
Hi.
Thanks, but I'm just yer average joe....
As fer custom settings (for either a canned Edge or Gryphon device ). I lifted this from one of the fine members in this thread with some modifications:
87 Level 2 Tune
Shift Firmness: +7 for all gears; (you can try a bit higher - personal preference here)
Standard Shift Points: Same
Torque Converter Standard Lock Points: standard for now (try -4 for 4th gear, -2 for 3rd gear later)
WOT Shift: 1-2:5350 2-3:5300 3-4:4800
WOT Fuel: 1.5
Timing: 0
Rev Limit: 6000 (you need 400-600 rpm of headroom above the max shift point)
You can bump up the timing by 0.5 points for every 1 point increase in octane; drop it back is you detect any detonation.
There are a lot of folks here who have more experience than me with this device - I'm an SCT guy. Also be aware not all trucks respond the same to these tweaks as there are literally hundreds of different PCM calibration codes for the F150. If you run into any quirkiness, immediately return to the default settings - or stock.
And lastly - highly recommend you seek custom tuning from PHP - with 35's you need all the torque increases you can get.
Good luck!
MGD
#45
Senior Member
Listen to MGDs advice he has helped me alot I know I probably get on his nerves with all my questions but he did help me alot with my programmer and custom options BTW MGD the custom options you told me to go with are great I love it even more now had to back the shift firmness back down to 10 my girl didn't like the throw you back in the seat shifts lol
The following users liked this post:
MGD (04-22-2014)
#46
Listen to MGDs advice he has helped me alot I know I probably get on his nerves with all my questions but he did help me alot with my programmer and custom options BTW MGD the custom options you told me to go with are great I love it even more now had to back the shift firmness back down to 10 my girl didn't like the throw you back in the seat shifts lol
Naw bud - you dint get under my skin at all, lol. No worries.
Very glad you like the settings!
Cheers!
MGD
#47
Dang MGD!
Throwing some serious knowledge down for us! Whoever orginally wrote that, tell them i appreciate it! Once i get home from work ill look into PHP and getting a custom tune. I already have the Gryphon and want to take full advantage of it! Im still debating on what custom tune to go with. If thats my only worrym then im doing pretty well!!
Throwing some serious knowledge down for us! Whoever orginally wrote that, tell them i appreciate it! Once i get home from work ill look into PHP and getting a custom tune. I already have the Gryphon and want to take full advantage of it! Im still debating on what custom tune to go with. If thats my only worrym then im doing pretty well!!
#48
Dang MGD!
Throwing some serious knowledge down for us! Whoever orginally wrote that, tell them i appreciate it! Once i get home from work ill look into PHP and getting a custom tune. I already have the Gryphon and want to take full advantage of it! Im still debating on what custom tune to go with. If thats my only worrym then im doing pretty well!!
Throwing some serious knowledge down for us! Whoever orginally wrote that, tell them i appreciate it! Once i get home from work ill look into PHP and getting a custom tune. I already have the Gryphon and want to take full advantage of it! Im still debating on what custom tune to go with. If thats my only worrym then im doing pretty well!!
Hi bud - will do!
Yo [MENTION=175636]08silverbullet[/MENTION], ye have kudos incoming! Good job!
MGD
#49
Dang MGD! Throwing some serious knowledge down for us! Whoever orginally wrote that, tell them i appreciate it! Once i get home from work ill look into PHP and getting a custom tune. I already have the Gryphon and want to take full advantage of it! Im still debating on what custom tune to go with. If thats my only worrym then im doing pretty well!!
The following users liked this post:
dcferg (04-22-2014)
#50
quick questions while im looking at this custom additions to the level 2 tune:
you mentioned "same" under standard shift points.. Did you mean same as in the same change (+7) as done to the shift firmness? Or did you mean same as leave it the hell alone?
you mentioned "same" under standard shift points.. Did you mean same as in the same change (+7) as done to the shift firmness? Or did you mean same as leave it the hell alone?