GOT my BFGs...
#1
Mo-rican
Thread Starter
GOT my BFGs...
Im extatic! I finally got my tires. (Thanks Nate)... Tomorrow i will get the truck leveled "2.5 HBS" and BFGs 305/65/18 & stock wheels. I know i'm already in too deep, but will ask anyway. Anyone have any advice or issues that I should be aware of with this setup? Thanks. I will post pics once done.
#2
Member
I just got a new set of 305's I love them. I had 285's wished I would of went ahead and got the bigger tires the first time but I sold my 285's for 800. I need to post some pics.
#3
Mo-rican
Thread Starter
Had them installed today along with the HBS level. All I need is an alignment which I will take care of tomorrow. Love it!! No rubbing either.
Last edited by joksanmo; 05-05-2010 at 04:47 PM.
#4
Junior Member
I have the 285/18's on mine and the only problem I've had is wear. They call for 80# max psi...I ran about 45 to soften the ride and drove mine real hard on 9 hr trips home on interstates and constantly running thru pastures and everywhere else on pipeline projects. The wear problem I've had is on the rear....Maybe they were overkill for a 1/2 ton but the rears seemed to wear in the middle fairly quick. Is it because the bed and all is so light and they're kinda hopping? Dunno....but I put 30K hard miles on them and they did exactly what I needed. Rock,brush stumps, snow, highways,no problem. Gonna replace them and if I go back w/KO, gonna run the manufacturers recommended 35 and see how that does. May go with Nitto Terras as an 8 ply...just gonna flip a coin,but, that was the only problem with the KO's I had.
#5
Member
I have the 285/18's on mine and the only problem I've had is wear. They call for 80# max psi...I ran about 45 to soften the ride and drove mine real hard on 9 hr trips home on interstates and constantly running thru pastures and everywhere else on pipeline projects. The wear problem I've had is on the rear....Maybe they were overkill for a 1/2 ton but the rears seemed to wear in the middle fairly quick. Is it because the bed and all is so light and they're kinda hopping? Dunno....but I put 30K hard miles on them and they did exactly what I needed. Rock,brush stumps, snow, highways,no problem. Gonna replace them and if I go back w/KO, gonna run the manufacturers recommended 35 and see how that does. May go with Nitto Terras as an 8 ply...just gonna flip a coin,but, that was the only problem with the KO's I had.
80psi is way to much and 35 isn't enough run them at 40 that's what I ran my 285's at and they wore evenly.
#7
Mark
iTrader: (1)
should of bought the KM2 muds...they are bad ***...
Trending Topics
#8
Mo-rican
Thread Starter
Techrep: Those KM2s do look awesome, but I don't mud or off-road enough to justify the tire, besides I got these for a very good price and the tires are almost new, they still have the little rubber **** on them.
BIG Shout Out to STREET LEGAL CUSTOMS in Reading Area, PA. They balanced, mounted and intsalled my leveling kit, then washed and shined the tires at an extremely good price. Excellet customer service to boot.
Last edited by joksanmo; 05-07-2010 at 09:46 PM.
#9
Senior Member
Im extatic! I finally got my tires. (Thanks Nate)... Tomorrow i will get the truck leveled "2.5 HBS" and BFGs 305/65/18 & stock wheels. I know i'm already in too deep, but will ask anyway. Anyone have any advice or issues that I should be aware of with this setup? Thanks. I will post pics once done.