Gettin her cleaned up!!!!
#21
Zack AKA Doctor guy
Sounds like your getting right to work making your truck your own! Good to hear! Where are you getting your tow mirrors from? I'm planning on getting tow mirrors for my truck as well one of these days
#22
Senior Member
Thread Starter
Originally Posted by F-150forlife
Sounds like your getting right to work making your truck your own! Good to hear! Where are you getting your tow mirrors from? I'm planning on getting tow mirrors for my truck as well one of these days
#23
Zack AKA Doctor guy
Originally Posted by RajunKajun59
I went to 1AAuto. They are cheaper then Tasca, I could have gotten my dealership to meet Tascs price but they could not get the mirrors.
#24
Senior Member
Thread Starter
Alright guys finally getting around to posting the pictures of all the work I have done.
So Here is the paint booth where I sprayed my Running Boards and Cowls
This is the finished Cowls and Running Boards
I drove around with just these done for a while as my test pieces, probably about a week to make sure they held up and got baked on really well.
So Here is the paint booth where I sprayed my Running Boards and Cowls
This is the finished Cowls and Running Boards
I drove around with just these done for a while as my test pieces, probably about a week to make sure they held up and got baked on really well.
Last edited by RajunKajun59; 03-20-2012 at 10:23 AM.
#26
Senior Member
Thread Starter
So I got a little daring and wanted some lights behind my grill. I fgured there is enough install threads for these things so here is a finsihed Picture.
I need to add these are 55w but I put some 100w bulbs in after the picture was taken, A lot brighter now
EDIT: Had a few people ask me how I mounted these guys. So here they are. I still need to add 2 more tie ins to the frame below the bar. To stop the lights from shaking as bad.
Here is where they run into the light bracket.
Here is the bolt location.
Here is the Relay location.
This is where I placed the switch.
I need to add these are 55w but I put some 100w bulbs in after the picture was taken, A lot brighter now
EDIT: Had a few people ask me how I mounted these guys. So here they are. I still need to add 2 more tie ins to the frame below the bar. To stop the lights from shaking as bad.
Here is where they run into the light bracket.
Here is the bolt location.
Here is the Relay location.
This is where I placed the switch.
Last edited by RajunKajun59; 03-24-2012 at 10:44 PM.
#27
Senior Member
Thread Starter
And now for some pictures of my big painting booth when I finally got around to spraying, the bed rails, tailgate cap, bumper step, lower valance, and door handles.
After the first coat
People do look at you funny when you tape up an entire truck like this.
After the first coat
People do look at you funny when you tape up an entire truck like this.
#29
Senior Member
Thread Starter
And Finally my truck all Gussied up one more time, sans bed cover, and Pre-Towing Mirrors.
:guns milie:
Next Pictures will be with the towing Mirrors haven't had any daylight bright enough yet to take them. Will Probably wait till I wash her again or might be dirty with the boat in tow who knows.
Hope you guys enjoy.
:guns milie:
Next Pictures will be with the towing Mirrors haven't had any daylight bright enough yet to take them. Will Probably wait till I wash her again or might be dirty with the boat in tow who knows.
Hope you guys enjoy.