Topic Sponsor
2004 - 2008 Ford F150 General discussion on the 2004 - 2008 Ford F150 truck.

fx4 2004 rear axle brushing

Thread Tools
 
Search this Thread
 
Old 02-07-2016, 02:36 PM
  #1  
Junior Member
Thread Starter
 
ederzapata's Avatar
 
Join Date: Feb 2016
Posts: 9
Received 0 Likes on 0 Posts
Question fx4 2004 rear axle brushing

I own FX4 2004 with 90,000 miles , the problem is that when turning left or right at low or high speed, feel a vibration on the rear axle as the wheels brushed with something, to move in a straight line no vibration or noise, only when I turn , I was checked in code reader and marks solenoid 4x4 I do? I can drive well ? I can cause further damage ? I help me , I'm in mexico city!
Old 02-07-2016, 04:05 PM
  #2  
Senior Member
 
vintageman's Avatar
 
Join Date: Jun 2014
Location: Martinez, Georgia
Posts: 1,687
Received 264 Likes on 214 Posts

Default

Sounds like it may need some friction modifier in the rear end? Have you changed the diff fluid lately? I am assuming that you have the limited slip diff correct? Not a hard job to change out.
Old 02-07-2016, 07:07 PM
  #3  
Senior Member
 
PerryB's Avatar
 
Join Date: May 2014
Location: Chico, Ca.
Posts: 4,574
Received 964 Likes on 742 Posts

Default

I agree, with a minor difference. Assuming you have a limited slip differential, the clutch pack is probably glazed over and will need replacement. In my experience, if its been shuddering / vibrating very long, the clutches are glazed and a fluid change alone won't fix it.
Old 02-08-2016, 04:44 PM
  #4  
Junior Member
Thread Starter
 
ederzapata's Avatar
 
Join Date: Feb 2016
Posts: 9
Received 0 Likes on 0 Posts
Question if is glazed?

if the clutch is crystallized , what should I do? I remind you that it is automatic , the cluthc is the torque converter ? sorry but I have many doubts, suggest that you change the oil it first? whath kind need oil if limited slip differential ? iam sorry idont speak english very well...
Old 02-08-2016, 06:15 PM
  #5  
Senior Member
 
PerryB's Avatar
 
Join Date: May 2014
Location: Chico, Ca.
Posts: 4,574
Received 964 Likes on 742 Posts

Default

I'm talking about the clutches in the rear differential, assuming it's a limited slip.
The following users liked this post:
ederzapata (02-09-2016)
Old 02-09-2016, 12:49 AM
  #6  
Junior Member
Thread Starter
 
ederzapata's Avatar
 
Join Date: Feb 2016
Posts: 9
Received 0 Likes on 0 Posts
Question differential clutches

ok then there are clutches in the differential, if I change the oil and the sound and vibration of continuous rear axle, I replace clutches? It is expensive to repair? the nearest store only have 80 w 140 mobil synthetic oil, that serves?
Old 02-09-2016, 07:29 AM
  #7  
Senior Member
 
nrivera04's Avatar
 
Join Date: Apr 2015
Location: MS Gulf Coast
Posts: 1,794
Received 268 Likes on 247 Posts
Default

The 80/140 will work if that's all you can get your hands on. The manual calls for 75/140. You also need to get a friction modifier too. It's a 4-6 ounce squirt tube or bottle found with or near the gear oil. Any brand is fine (Trans X, Equa-Torque, etc). This reduces the friction betweend the diff clutches and will eliminate the chatter you are hearing.
The following users liked this post:
ederzapata (02-10-2016)
Old 02-10-2016, 11:05 PM
  #8  
Junior Member
Thread Starter
 
ederzapata's Avatar
 
Join Date: Feb 2016
Posts: 9
Received 0 Likes on 0 Posts
Default

thaNKS FOR YOR HELP!



Quick Reply: fx4 2004 rear axle brushing



All times are GMT -4. The time now is 06:48 PM.