Full throttle belt squeel
#13
Mine does it as well, the belt is spinning all the accessories, water pump, power steering, alternator, etc at fast rpms, then the truck shifts and rpms drop but the other accessories are still moving fast so they slip on the belt for a split second. I'm purchasing a Gatorback before too long...just looks tricky to replace in the crowded front of the engine
#15
Belt and tensionner should be replaced eventually especially if it squeals at full throttle. Both are very simple to change and inexpensive. You can get away with just changing the belt but from experience the tensionner becomes weak and will not allow proper belt contact and eventually even a new belt could squeal.
#16
Senior Member
If you're going to replace the tensioner, I'd suggest checking the idler pulleys as well. Same load, same bearings, same probably failure point. When I replaced my tensioner (I have a 4.6) I checked the idler pulleys and they were near shot as well.
#17
Senior Member
Last weekend I replaced tensioner and idler pulleys and belt. Had bad bearings on both the tensioner and idler. Took us less than an hour to replace everything. But the tensioner was damn near locked up it took a 3 foot cheater pipe to get slack in the belt. But all is good now. Hell I had forgotten how quiet my motor was