Fuel Pressure Gauge
#1
Junior Member
Thread Starter
Fuel Pressure Gauge
Hi all. I was wondering if any one out there has installed a fuel pressure gauge? I have a 2005 4.6L and would just like to be able to monitor my fuel pressure. Plus it would be easier to diagnose and possibly catch something before becoming a major issue. Any input is appreciated. Thanks
#3
Junior Member
Thread Starter
I have a scan gauge II but when I go to the fuel pressure gauge nothing pops up. I also have a diablosport intune and I just don't want to go out and buy another $300 programmer to monitor just the fuel pressure. The scan gauge monitors everything I want except the fuel pressure.
#4
Senior Member
Not sure with the 04-08s if there is a factory sending unit to monitor it. On my 03 I had to remove the small sharder(sp) valve, install an adapter then a stainless flex line(remote mount) and then the AutoMeter sending unit. The reason for the flex line is due to the vibrations on te engine causing premature sensor failure.
Wayne
Wayne
The following users liked this post:
USAF05F150XLT (05-10-2014)
#5
Junior Member
Thread Starter
I want to say they do have a factory sending unit. If I remember correctly when hook up my brothers trinity just to monitor various things fuel pressure is one of them. Would you happen to have a picture of the schrader valve? I'm not sure mine has a Schrader valve.
The following users liked this post:
USAF05F150XLT (05-10-2014)