front seat removal
#1
Senior Member
Thread Starter
front seat removal
ok i have this reallllllly annoying squeek in the driver seat and im trying to remove everything to find out where its coming from,but i cant get that stupid plastic piece off the side of the seat (like taking the lumbar and seat adjustment **** and lever) if anyone knows how please let me know! thanks.
The following users liked this post:
o6S1D9e (01-30-2020)
#2
Administrator
Before you go thru all that, make sure that your jump doors are SECURELY closed. I had a S'cab and if the rearmost doors were not closed with some *** behind them, they would squeek like crazy.
Throw some WD40 or grease on the striker (the U bolt looking thing on the bottom and top of the doors that catch the door) and see if it still makes the squeek.
Throw some WD40 or grease on the striker (the U bolt looking thing on the bottom and top of the doors that catch the door) and see if it still makes the squeek.
The following users liked this post:
o6S1D9e (01-30-2020)
#4
Administrator
Oh... Just figured I would throw that out there.
There should only be a U clip holding on the lumbar **** and the seat adjustment **** on. Very similary to if you have ever removed the handle of the manual crank up windows. The U clip should just slide into a recession into the handle and the stud it mounts to.
There should only be a U clip holding on the lumbar **** and the seat adjustment **** on. Very similary to if you have ever removed the handle of the manual crank up windows. The U clip should just slide into a recession into the handle and the stud it mounts to.
The following users liked this post:
o6S1D9e (01-30-2020)
The following users liked this post:
o6S1D9e (01-30-2020)
#7
Hate to bring this back from the dead but my passenger seat squeaks like mad nearly all the time. I think I found the issue, one of the seat bolts was loose. I tightened it and the noise has almost gone away. Anyone now what the seat bolt installation torque is? Any other causes of this squeak? Thanks.
The following users liked this post:
o6S1D9e (01-30-2020)