Front Bumper Brackets - Are they Bent?
#1
Senior Member
Thread Starter
Front Bumper Brackets - Are they Bent?
So my front bumper hanging off kilter has been annoying me since I got the truck. The passenger side is pushed in about 1/2" and just slightly higher than the drivers side. I managed to get some time to remove it today and am a little befuddled by what I see.
Obviously the drivers side one appears to be bent to me. However, the drivers side of the bumper wasn't the problem. It was hanging fine.
Should I be looking elsewhere for the problem?
Obviously the drivers side one appears to be bent to me. However, the drivers side of the bumper wasn't the problem. It was hanging fine.
Should I be looking elsewhere for the problem?
#2
Mark
iTrader: (1)
Both look bent to me.
#3
Senior Member
Thread Starter
#4
Mark
iTrader: (1)
Google images... and the brackets are made to bend so the frame does not and the bumper itself is more than likely bent too. hit a junk yard and find a good set. what year is your truck ?
Last edited by techrep; 06-28-2016 at 02:46 PM.
#5
Senior Member
Thread Starter
Yeah I already tried google images to no avail. As for the junk yard, no one seems to have this year range out here.
#6
Mark
iTrader: (1)
They are only $10 per side...
VARIOUS MFR FO1067159 {#4L3Z17B984AA} Info
Bumper Mounting Plate; Right Front (Only 10 Remaining)
VARIOUS MFR FO1067159 {#4L3Z17B984AA} Info
Bumper Mounting Plate; Right Front (Only 10 Remaining)
VARIOUS MFR FO1067159
Trending Topics
#8
Senior Member
Thread Starter
I found the drivers side bracket: http://www.tascaparts.com/oe-ford/6l3z17b985aacp
The Tasca page that lists all the parts for the bumper only lists that one bracket, not one for each side: http://www.tascaparts.com/auto-parts...nts-front-scat
Still looking for the passenger side. Is there a chance they are identical? Anyone have some parts breakdowns they could check for me?
The Tasca page that lists all the parts for the bumper only lists that one bracket, not one for each side: http://www.tascaparts.com/auto-parts...nts-front-scat
Still looking for the passenger side. Is there a chance they are identical? Anyone have some parts breakdowns they could check for me?
Last edited by Blenderite; 06-28-2016 at 03:56 PM.
#9
Moderator