Forced induction 2008 fx2 4.6
02-24-2013, 01:34 PM
#21
Senior Member
i agree with I just don't know..with performance parts, unless coming from an extremely good friend, its better to go ahead pay the extra money and buy it new. the guy i talked to at sts, cant think of his name right off hand, but he was helpful. he went through every part and piece that came with the full kit. even told me pretty much everything about the turbo. i'll prolly end up buying it, it just wont be right now like i had planned. i'm still curious about the 01-04 mustang twinscrew s/c. from my understanding everything bolts up perfectly. the intake mouth is on the wrong side, but i wouldn't think thats to much trouble to overcome. 01-04 mustang 4.6 heads, intake, ect. bolt to our engine only differance is that our trucks are fly by wire not sure what year the pony went to fbw or if it will bolt up
02-25-2013, 01:47 PM
#26
Senior Member
Me personally. absolutely nothing. I know a fair about about the motor i have, but have a lot to learn. The little i do know is that the best way is to find a complete donor motor and all. I looked into it for a quick minute but could only find stuff on previous gen trucks. It might be easier to do a 4v head swap cam it a do a blower or turbo. Either way good luck. you could always bore the motor?
02-25-2013, 01:56 PM
#27
Senior Member
Thread Starter
from what i understand is my ecm wont work with the 4v setup..if i don't end up putting a sts on it i'm leaning towards trick flow twisted wedge top end kit, troyer pcv for tranny, 3.73 gears, programmer, and i'm looking for an intake manifold right now. i know 01-04 mustang stuff will fit but not sure about how hard it is to either use my throttle body since its fly by wire, or what kinda custom work to get a mustang fly by wire throttle body to work. truck only has like 55,000 miles on it so hopefully it'll be a while before i need to break into the bottom end
02-25-2013, 02:28 PM
#28
Senior Member
It took me about 5 seconds to find it haha once i tried. here's the link
https://www.f150forum.com/f4/32-valv...or-stx-143293/
page 9 is a parts list but read through the whole things because he updates as time goes and explains things he did.
https://www.f150forum.com/f4/32-valv...or-stx-143293/
page 9 is a parts list but read through the whole things because he updates as time goes and explains things he did.
Last edited by I just don't know; 02-25-2013 at 02:42 PM.
02-26-2013, 01:46 AM
#29
Senior Member
Thread Starter
thats intersting..unfortunetly i dont have the time to do it. when i get back state side. goin on a trip and spending time with my kids. so i'll only have a couple days to work on my truck..awesome project though